Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography

被引：3
|
作者：
Fabregue, Damien [1 ,2 ]
Landron, Caroline [1 ,2 ]
Bouaziz, Olivier [3 ]
Maire, Eric [1 ,2 ]
机构：
[1] Univ Lyon, CNRS, F-69007 Lyon, France
[2] INSA Lyon, MATEIS, UMR5510, F-69621 Villeurbanne, France
[3] ArcelorMittal Res, F-57283 Maizieres Les Metz, France
来源：
STEEL RESEARCH INTERNATIONAL | 2015年 / 86卷 / 10期
关键词：
TWIP steels; damage; in situ 3D X ray tomography; modeling; INITIATION; BEHAVIOR; GROWTH; VOIDS; MODEL;
D O I：
10.1002/srin.201500072
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper, the damage behavior of three different steels is studied by the means of 3D X ray tomography in tension: a Fe22Mn0.6C austenitic TWIP steel, a 316 L austenitic stainless steel, and an interstitial-free (IF) ferritic one. The comparison gives a better insight into the damage of the twinning-induced plasticity steel (Fe22Mn0.6C), which is a promising one due its very high mechanical properties. It is shown that the damage process of this type of steel involves not only an important nucleation of small voids but also a large growth of the biggest cavities. This last conclusion is true even if a constant macroscopical triaxiality is observed.
引用
收藏
页码：1197 / 1203
页数：7
相关论文
共 50 条
  • [41] Effects of off-axis angle on shear progressive damage of 3D woven composites with X-ray micro-computed tomography
    Zhang, Diantang
    Liu, Xiaodong
    Gu, Yuanhui
    Sun, Mengyao
    Yu, Song
    Zhang, Yifan
    Qian, Kun
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 115 : 311 - 320
  • [42] 3D analysis of ceramic powder sintering by synchrotron X-ray nano-tomography
    Venkatesh, Aatreya Manjulagiri
    Bouvard, Didier
    Lhuissier, Pierre
    Villanova, Julie
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (06) : 2553 - 2563
  • [43] Crack nucleation and growth in α/β titanium alloy with lamellar microstructure under uniaxial tension: 3D X-ray tomography analysis
    Dang, Ning
    Liu, Lingyu
    Adrien, Jerome
    Cazottes, Sophie
    Xiao, Wenlong
    Ma, Chaoli
    Zhou, Lian
    Maire, Eric
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 747 : 154 - 160
  • [44] Freeze-thaw crack determination in cementitious materials using 3D X-ray computed tomography and acoustic emission
    Shields, Yasmina
    Garboczi, Edward
    Weiss, Jason
    Farnam, Yaghoob
    CEMENT & CONCRETE COMPOSITES, 2018, 89 : 120 - 129
  • [45] In situ X-ray tomography characterisation of 3D deformation of C/C-SiC composites loaded under tension
    Chen, Yang
    Shi, Yuan
    Chateau, Camille
    Marrow, James
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 145
  • [46] Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography
    Lachambre, Joel
    Rethore, Julien
    Weck, Arnaud
    Buffiere, Jean-Yves
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 71 : 3 - 10
  • [47] Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels
    Landron, C.
    Maire, E.
    Bouaziz, O.
    Adrien, J.
    Lecarme, L.
    Bareggi, A.
    ACTA MATERIALIA, 2011, 59 (20) : 7564 - 7573
  • [48] Damage investigation in aluminum alloys by X ray tomography
    Maire, E.
    Grenier, J. C.
    Babout, L.
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 821 - 827
  • [49] Investigating the evolving microstructure of lithium metal electrodes in 3D using X-ray computed tomography
    Taiwo, O. O.
    Finegan, D. P.
    Paz-Garcia, J. M.
    Eastwood, D. S.
    Bodey, A. J.
    Rau, C.
    Hall, S. A.
    Brett, D. J. L.
    Lee, P. D.
    Shearing, P. R.
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2017, 19 (33) : 22111 - 22120
  • [50] Quantitative 3D petrography using X-ray tomography 2: Combining information at various resolutions
    Pamukcu, Ayla S.
    Gualda, Guilherme A. R.
    GEOSPHERE, 2010, 6 (06): : 775 - 781
12345