Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography

被引：3
|
作者：
Fabregue, Damien [1 ,2 ]
Landron, Caroline [1 ,2 ]
Bouaziz, Olivier [3 ]
Maire, Eric [1 ,2 ]
机构：
[1] Univ Lyon, CNRS, F-69007 Lyon, France
[2] INSA Lyon, MATEIS, UMR5510, F-69621 Villeurbanne, France
[3] ArcelorMittal Res, F-57283 Maizieres Les Metz, France
来源：
STEEL RESEARCH INTERNATIONAL | 2015年 / 86卷 / 10期
关键词：
TWIP steels; damage; in situ 3D X ray tomography; modeling; INITIATION; BEHAVIOR; GROWTH; VOIDS; MODEL;
D O I：
10.1002/srin.201500072
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper, the damage behavior of three different steels is studied by the means of 3D X ray tomography in tension: a Fe22Mn0.6C austenitic TWIP steel, a 316 L austenitic stainless steel, and an interstitial-free (IF) ferritic one. The comparison gives a better insight into the damage of the twinning-induced plasticity steel (Fe22Mn0.6C), which is a promising one due its very high mechanical properties. It is shown that the damage process of this type of steel involves not only an important nucleation of small voids but also a large growth of the biggest cavities. This last conclusion is true even if a constant macroscopical triaxiality is observed.
引用
收藏
页码：1197 / 1203
页数：7
相关论文
共 50 条
  • [31] Fractal analysis of 2D and 3D mesocracks in recycled aggregate concrete using X-ray computed tomography images
    Shang, Xiaoyu
    Yang, Jingwei
    Wang, Simiao
    Zhang, Mingzhong
    JOURNAL OF CLEANER PRODUCTION, 2021, 304
  • [32] 3D characterization of the propagation of small fatigue cracks in steels with different forging conditions
    Lorenzino, Pablo
    Buffiere, Jean-Yves
    Verdu, Catherine
    INTERNATIONAL JOURNAL OF FATIGUE, 2018, 115 : 2 - 10
  • [33] Phase Transformation and Microstructural Evolution of CuS Electrodes in Solid-State Batteries Probed by In Situ 3D X-Ray Tomography
    Zhang, Zhenggang
    Dong, Kang
    Mazzio, Katherine A.
    Hilger, Andre
    Markoetter, Henning
    Wilde, Fabian
    Heinemann, Tobias
    Manke, Ingo
    Adelhelm, Philipp
    ADVANCED ENERGY MATERIALS, 2023, 13 (02)
  • [34] In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete
    Yang, Z.
    Ren, W.
    Sharma, R.
    McDonald, S.
    Mostafavi, M.
    Vertyagina, Y.
    Marrow, T. J.
    CEMENT & CONCRETE COMPOSITES, 2017, 75 : 74 - 83
  • [35] Finite element 3D reconstruction of the pulmonary acinus imaged by synchrotron X-ray tomography
    Tsuda, A.
    Filipovic, N.
    Haberthuer, D.
    Dickie, R.
    Matsui, Y.
    Stampanoni, M.
    Schittny, J. C.
    JOURNAL OF APPLIED PHYSIOLOGY, 2008, 105 (03) : 964 - 976
  • [36] 3D composite reinforcement meso FE analyses based on X-ray computed tomography
    Naouar, N.
    Vidal-Salle, E.
    Schneider, J.
    Maire, E.
    Boisse, P.
    COMPOSITE STRUCTURES, 2015, 132 : 1094 - 1104
  • [37] Failure Analysis of a Composite Rudder Stock Using 3D X-ray Microcomputed Tomography
    Kar, Nikhil K.
    Bovie, Adam
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (01) : 24 - 28
  • [38] Aggregate Morphological Characterization with 3D Optical Scanner versus X-Ray Computed Tomography
    Liu, Yu
    Gong, Fangyuan
    You, Zhanping
    Wang, Hainian
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2018, 30 (01)
  • [39] Comparison Among Different Modeling Techniques of 3D Micromechanical Modeling of Damage in Unidirectional Composites
    Wang, Huaiwen
    Qin, Qing-Hua
    Ji, Hongwei
    Sun, Ying
    ADVANCED SCIENCE LETTERS, 2011, 4 (02) : 400 - 407
  • [40] Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model
    Cao, T. -S.
    Maire, E.
    Verdu, C.
    Bobadilla, C.
    Lasne, P.
    Montmitonnet, P.
    Bouchard, P. -O.
    COMPUTATIONAL MATERIALS SCIENCE, 2014, 84 : 175 - 187
12345