Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography

被引：3
|
作者：
Fabregue, Damien [1 ,2 ]
Landron, Caroline [1 ,2 ]
Bouaziz, Olivier [3 ]
Maire, Eric [1 ,2 ]
机构：
[1] Univ Lyon, CNRS, F-69007 Lyon, France
[2] INSA Lyon, MATEIS, UMR5510, F-69621 Villeurbanne, France
[3] ArcelorMittal Res, F-57283 Maizieres Les Metz, France
来源：
STEEL RESEARCH INTERNATIONAL | 2015年 / 86卷 / 10期
关键词：
TWIP steels; damage; in situ 3D X ray tomography; modeling; INITIATION; BEHAVIOR; GROWTH; VOIDS; MODEL;
D O I：
10.1002/srin.201500072
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper, the damage behavior of three different steels is studied by the means of 3D X ray tomography in tension: a Fe22Mn0.6C austenitic TWIP steel, a 316 L austenitic stainless steel, and an interstitial-free (IF) ferritic one. The comparison gives a better insight into the damage of the twinning-induced plasticity steel (Fe22Mn0.6C), which is a promising one due its very high mechanical properties. It is shown that the damage process of this type of steel involves not only an important nucleation of small voids but also a large growth of the biggest cavities. This last conclusion is true even if a constant macroscopical triaxiality is observed.
引用
收藏
页码：1197 / 1203
页数：7
相关论文
共 50 条
  • [11] 3D X-ray computerized tomography of White Etching Cracks (WEC)
    Danielsen, H. K.
    Carrasco, A. J.
    Faester, S.
    Dah, K., V
    Guzman, F. Gutierrez
    Sauvage, P.
    Jacobs, G.
    MATERIALS CHARACTERIZATION, 2019, 150 : 78 - 87
  • [12] 3D characterization of fatigue damage mechanisms in a cast aluminum alloy using X-ray tomography
    Luetje, M.
    Wicke, M.
    Bacaicoa, I.
    Brueckner-Foit, A.
    Geisert, A.
    Fehlbier, M.
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 103 : 363 - 370
  • [13] X-ray computed tomography for 3D plant imaging
    Piovesan, Agnese
    Vancauwenberghe, Valerie
    Van de Looverbosch, Tim
    Verboven, Pieter
    Nicolai, Bart
    TRENDS IN PLANT SCIENCE, 2021, 26 (11) : 1171 - 1185
  • [14] Damage tolerant design of cast components based on defects detected by 3D X-ray computed tomography
    Shirani, M.
    Harkegard, G.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 41 : 188 - 198
  • [15] Damage in dual phase steels and its constituents studied by X-ray tomography
    Bareggi, A.
    Maire, E.
    Bouaziz, O.
    Di Michiel, M.
    INTERNATIONAL JOURNAL OF FRACTURE, 2012, 174 (02) : 217 - 227
  • [16] Damage in dual phase steels and its constituents studied by X-ray tomography
    A. Bareggi
    E. Maire
    O. Bouaziz
    M. Di Michiel
    International Journal of Fracture, 2012, 174 : 217 - 227
  • [17] 3D Characterizations of Pores and Damages in C/SiC Composites by Using X-Ray Computed Tomography
    Wang, Long
    Yuan, Kai
    Luan, Xingang
    Li, Zhiqiang
    Feng, Guolin
    Wu, Jianguo
    APPLIED COMPOSITE MATERIALS, 2019, 26 (02) : 493 - 505
  • [18] In-situ 3D characterization of tensile damage mechanisms in A319 aluminium alloy using X-ray tomography and digital volume correlation
    Li, Zaidao
    Limodin, Nathalie
    Tandjaoui, Amina
    Quaegebeur, Philippe
    Witz, Jean-Francois
    Balloy, David
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 794
  • [19] Resolving 3D microstructure evolution of ceramifiable composites at elevated temperatures using in-situ X-ray computed tomography
    Wang, Huanfang
    Zhao, Tianfei
    Gong, Zheng
    Gu, Jiahui
    Deng, Yong
    Zhang, Chao
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2024, 177
  • [20] Fatigue damage evolution and residual strength analysis of 3D5D braided composites using X-ray computed tomography, acoustic emission, and digital image correlation
    Liu, Xiaodong
    Ge, Jingran
    Zhang, Diantang
    Liang, Jun
    COMPOSITE STRUCTURES, 2024, 344
12345