All-optical SR Latching Circuit with Simultaneous Inverted and Non-inverted Outputs Using Fabry-Perot Laser Diodes
被引:0
作者:
Tran Quoc Hoai
论文数: 0引用数: 0
h-index: 0
机构:
Korea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South KoreaKorea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South Korea
Tran Quoc Hoai
[1
]
Nakarmi, Bikash
论文数: 0引用数: 0
h-index: 0
机构:
Korea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South KoreaKorea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South Korea
Nakarmi, Bikash
[1
]
Won, Yong Hyub
论文数: 0引用数: 0
h-index: 0
机构:
Korea Adv Inst Sci & Technol, Dept Elect Engn, Daejeon, South KoreaKorea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South Korea
Won, Yong Hyub
[2
]
机构:
[1] Korea Adv Inst Sci & Technol, Dept Informat & Commun Engn, Daejeon, South Korea
[2] Korea Adv Inst Sci & Technol, Dept Elect Engn, Daejeon, South Korea
来源:
2012 INTERNATIONAL CONFERENCE ON PHOTONICS IN SWITCHING (PS)
|
2012年
关键词:
All-optical SR latch;
optical bi-stability;
injection locking;
optical signal processing;
FLIP-FLOP;
SEMICONDUCTOR-LASER;
INJECTION LOCKING;
D O I:
暂无
中图分类号:
O43 [光学];
学科分类号:
070207 ;
0803 ;
摘要:
An all-optical SR latching circuit is experimentally demonstrated using Fabry-Perot laser diode. The SR latch is based on the bi-stability and injection-locking properties of FP-LD. The latching circuit provides simultaneous inverted and non-inverted outputs for both the set and the reset conditions. The set and reset pulses were generated by external modulators at 3.240 Gbit/s. Very low input powers were required for the latching function. The input powers for the set and reset signals were -17 dBm and -7 dBm, respectively. The on-off switching operation of the output was measured with a rising/falling time of about 90 ps.