Three-dimensional numerical study of heat and mass transfer in fluidized beds with spray nozzle

被引：10

作者：

Nagaiah, Chamakuri ^{[1
]}

Warnecke, Gerald ^{[1
]}

Heinrich, Stefan ^{[2
]}

Peglow, Mirko ^{[3
]}

机构：

[1] Otto Von Guericke Univ, Inst Anal & Numer, D-39106 Magdeburg, Germany

[2] Otto Von Guericke Univ, Inst Proc Equipment & Environm Technol, D-39106 Magdeburg, Germany

[3] Otto Von Guericke Univ, Inst Proc Engn, D-39106 Magdeburg, Germany

来源：

COMPUTERS & CHEMICAL ENGINEERING | 2008年 / 32卷 / 12期

关键词：

Fluidized beds; Granulation; Heat and mass transfer; Liquid injection; Convection-diffusion-reaction equations; Finite element method; Backward Euler method; Parallelization;

D O I：

10.1016/j.compchemeng.2008.02.009

中图分类号：

TP39 [计算机的应用];

学科分类号：

081203 ; 0835 ;

摘要：

The numerical computations of temperature and concentration distributions inside a fluidized bed with spray injection in three-dimensions are presented. A continuum model, based on rigorous mass and energy balance equations developed from Nagaiah et al., is used for the three-dimensional simulations. The three-dimensional model equation for nozzle spray is reformulated in comparison to Heinrich. For solving the non-linear partial differential equations with boundary conditions a finite element method is used for space discretization and an implicit Euler method is used for time discretization. The time-dependent behavior of the air humidity, air temperature, degree of wetting, liquid film temperature and particle temperature is presented using two different sets of experimental data. The presented numerical results are validated with the experimental results. Finally, the parallel numerical results are presented using the domain decomposition methods. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：2877 / 2890

页数：14

共 50 条

[11] Direct numerical simulation of heat and mass transfer of spheres in a fluidized bed
Feng, Zhi-Gang
Musong, Samuel Gem
POWDER TECHNOLOGY, 2014, 262 : 62 - 70
[12] Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two- and three-dimensional models)
Kawaguchi, T
Tanaka, T
Tsuji, Y
POWDER TECHNOLOGY, 1998, 96 (02) : 129 - 138
[13] Heat transfer in mechanically-fluidized particle beds
Siebert, A
Newborough, M
Highgate, D
CHEMICAL ENGINEERING RESEARCH & DESIGN, 2002, 80 (A3) : 332 - 334
[14] A three-dimensional model for the heat and mass transfer in air-gap membrane distillation
Cramer, Kerstin
Niceno, Bojan
Prasser, Horst-Michael
Leyer, Stephan
DESALINATION AND WATER TREATMENT, 2021, 241 : 51 - 63
[15] A three-dimensional control volume approach to modeling heat and mass transfer in foods materials
Ranjan, R
Irudayaraj, J
Jun, S
TRANSACTIONS OF THE ASAE, 2001, 44 (06): : 1975 - 1982
[16] Particle scale study of heat transfer in packed and fluidized beds of ellipsoidal particles
Gan, Jieqing
Zhou, Zongyan
Yu, Aibing
CHEMICAL ENGINEERING SCIENCE, 2016, 144 : 201 - 215
[17] Numerical analysis of interphase heat and mass transfer of cluster in a circulating fluidized bed
Wang Shuyan
Yin Lijie
Lu Huilin
Yu Long
Bouillard, Jacques
Hao Zhenhua
POWDER TECHNOLOGY, 2009, 189 (01) : 87 - 96
[18] Numerical analysis of the three-dimensional mass and heat transfer with inner moisture evaporation in porous cooked meat joints during vacuum cooling
Wang, LJ
Sun, DW
TRANSACTIONS OF THE ASAE, 2003, 46 (01): : 107 - 115
[19] A study of heat transfer in fluidized beds using an integrated DIA/PIV/IR technique
Patil, Amit V.
Peters, E. A. J. F.
Sutkar, Vinayak S.
Deen, N. G.
Kuipers, J. A. M.
CHEMICAL ENGINEERING JOURNAL, 2015, 259 : 90 - 106
[20] Three-dimensional numerical study of heat-affected zone in induction welding of tubes
Das, Prerana
Asperheim, John Inge
Grande, Bjornar
Petzold, Thomas
Hoemberg, Dietmar
COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2020, 39 (01) : 213 - 219

← 1 2 3 4 5 →