Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour-urea formaldehyde adhesive

被引：48

作者：

Moubarik, Amine ^{[1
]}

Mansouri, Hamid Reza ^{[2
]}

Pizzi, Antonio ^{[3
]}

Allal, Ahmed ^{[4
]}

Charrier, Fatima ^{[4
]}

Badia, Miguel Angel ^{[5
]}

Charrier, Bertrand ^{[4
]}

机构：

[1] ENSET, MAScIR NANOTECH, Rabat 10100, Morocco

[2] Univ Zabol, Dept Wood Sci & Technol, Zabol, Iran

[3] Univ Nancy 1, ENSTIB, Epinal, France

[4] Univ Pau & Pays Adour, IPREM EPCP, UMR 5254, F-64053 Pau 9, France

[5] EGGER ROL, Rion Des Landes, France

来源：

COMPOSITES PART B-ENGINEERING | 2013年 / 44卷 / 01期

关键词：

Wood; Resins; Mechanical properties; Physical properties; Rheological properties; EXTERIOR WOOD ADHESIVES; RESINS;

D O I：

10.1016/j.compositesb.2012.07.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The aim of this study was to determine the effect of corn flour content of urea formaldehyde (UF) resin on the panel properties of particleboard. Corn flour was added to UF resin to decrease the free formaldehyde content of particleboard panels. Some physical (thickness swelling and rheological characterization), mechanical (modulus of elasticity, modulus of rupture, internal bond strength and withdrawal of screws) properties and formaldehyde emission of particleboards were evaluated. The results showed that the introduction of small proportions of corn flour (7%, by weight) in UF resins contributes to the improvement of mechanical and physical properties of the boards and reduced their formaldehyde emissions. Hazardous petrochemical UF could be partially substituted in industrial applications by addition of corn flour. To our knowledge, this is the first study on this kind of wood adhesives. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：48 / 51

页数：4

共 27 条

[1]

[Anonymous], 2003, US Patent Application, Patent No. 20050070635

[2]

[Anonymous], 1993, 310 EN CEN EUR COMM

[3]

[Anonymous], 1953, US Patent, Patent No. 2629699

[4]

[Anonymous], 1993, 319 EN CEN EUR COMM

[5]

CEN European Committee for Standardisation, 1993, 317 EN CEN EUR COMM

[6]

CLARK AH, 1987, ADV POLYM SCI, V83, P57

[7]

Conner HA, ENCY POLYM MAT, V2, P8495

[8] Urea-formaldehyde (UF) adhesive resins for wood [J].

Dunky, M .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1998, 18 (02) :95-107

[9] INFLUENCE OF THE COMPOSITION OF TANNIN-UREA-FORMALDEHYDE RESINS IN THE PHYSICAL AND MECHANICALS PROPERTIES OF PARTICLEBOARD [J].

Goncalves, Fabricio Gomes ;

Costa Lelis, Roberto Carlos ;

da Silva Oliveira, Jose Tarcisio .

REVISTA ARVORE, 2008, 32 (04) :715-722

[10] The reduction of indoor air formaldehyde from wood based composites using urea treatment for building materials [J].

Hematabadi, H. ;

Behrooz, R. ;

Shakibi, A. ;

Arabi, M. .

CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) :743-746

← 1 2 3 →