Effect of tool parameters on mechanical properties, temperature, and force generation during FSW

被引：37

作者：

Akbari, Mostafa ^{[1
,2
]}

Aliha, M. R. M. ^{[2
]}

Keshavarz, S. M. E. ^{[3
]}

Bonyadi, A. ^{[4
]}

机构：

[1] IUST, Sch Automot Engn, Tehran, Iran

[2] IUST, Sch Ind Engn, Welding & Joining Res Ctr, Tehran 1684613114, Iran

[3] Univ Tehran, Sch Mech Engn, Tehran, Iran

[4] IUST, Progress Engn Fac, Tehran, Iran

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS | 2019年 / 233卷 / 06期

关键词：

Friction stir welding; force; welding tool; temperature; STIR PROCESSING ZONE; ALUMINUM-ALLOY; PIN PROFILE; SHOULDER DIAMETER; ROTATIONAL SPEED; FRICTION; MICROSTRUCTURE; OPTIMIZATION; AL;

D O I：

10.1177/1464420716681591

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The welding tool parameters play a critical role in obtaining weld strength during friction stir welding. In this investigation, the effect of welding tool parameters such as pin and shoulder diameter and pin height on the axial and traverse forces and also temperature of welding of AA5083 alloy was investigated. A specially designed dynamometer was used to measure the welding tool forces. Then, the mechanical properties of the welds were characterized using tensile tests. Moreover, macrostructure of welds was investigated in order to analyze weld quality. Finally, optimum values for shoulder diameter, pin height and pin diameter were determined.

引用

页码：1033 / 1043

页数：11

共 26 条

[1] Enhancing metallurgical and mechanical properties of friction stir lap welding of Al-Cu using intermediate layer
Akbari, M.
Bahemmat, P.
Haghpanahi, M.
Givi, M. -K. Besharati
[J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (06) : 518 - 524
[2] Effect of materials position on friction stir lap welding of Al to Cu
Akbari, M.
Behnagh, R. Abdi
Dadvand, A.
[J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (07) : 581 - 588
[3] Dissimilar Friction-Stir Lap Joining of 5083 Aluminum Alloy to CuZn34 Brass
Akbari, Mostafa
Behnagh, Reza Abdi
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2012, 43 (05): : 1177 - 1186
[4] [Anonymous], P IMECHE L
[5] [Anonymous], P IMECHE L
[6] Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks
Asadi, P.
Givi, M. K. Besharati
Rastgoo, A.
Akbari, M.
Zakeri, V.
Rasouli, S.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (9-12) : 1095 - 1107
[7] Asadi P., 2015, J MAT DESIGN APPL L, V230, P291
[8] Microstructural simulation of friction stir welding using a cellular automaton method: A microstructure prediction of AZ91 magnesium alloy
Asadi P.
Givi M.K.B.
Akbari M.
[J]. International Journal of Mechanical and Materials Engineering, 2015, 10 (1)
[9] Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy
Asadi, Parviz
Givi, Mohammad Kazem Besharati
Akbari, Mostafa
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4) : 301 - 311
[10] Mechanical Properties, Corrosion Resistance, and Microstructural Changes during Friction Stir Processing of 5083 Aluminum Rolled Plates
Behnagh, R. Abdi
Givi, M. K. Besharati
Akbari, M.
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (06) : 636 - 640

← 1 2 3 →