An updated review of adhesively bonded joints in composite materials

被引：547

作者：

Budhe, S. ^{[1
]}

Banea, M. D. ^{[1
]}

de Barros, S. ^{[1
]}

da Silva, L. F. M. ^{[2
]}

机构：

[1] Fed Ctr Technol Educ Celso Suckow Fonseca CEFET R, Ave Maracana,229, BR-20271110 Rio De Janeiro, RJ, Brazil

[2] Univ Porto, Fac Engn, Dept Engn Mecan, Rua Dr Roberto Frias,S-N, P-4200465 Oporto, Portugal

来源：

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 2017年 / 72卷

关键词：

Adhesively bonded joints; Composite materials; Damage modelling; Finite element method; Environmental factors; SINGLE-LAP JOINTS; MODE-I FRACTURE; REINFORCED POLYMER COMPOSITES; ATMOSPHERIC-PRESSURE PLASMA; COHESIVE ZONE MODELS; MECHANICAL-PROPERTIES; SHEAR-STRENGTH; CARBON-FIBER; WOOD ADHESIVE; DOUBLE-STRAP;

D O I：

10.1016/j.ijadhadh.2016.10.010

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Continuing interest and more developments in recent years indicated that it would be useful to update Banea and da Silva paper entitled "Adhesively bonded joints in composite materials: an overview". This paper presents an updated review of adhesively bonded joints in composite materials, which covers articles published from 2009 to 2016. The main parameters that affect the performance of bonded joints such as surface treatment, joint configuration, geometric and material parameters, failure mode etc. are discussed. The environmental factors such as pre-bond moisture, moisture and temperature are also discussed in detail and how they affect the durability of adhesive joints. Lots of shortcomings were resolved during the last years by developing new materials, new methods and models. However, there is still a potential to evaluate and identify the best possible combination of parameters which would give the best performance of composite bonded joints.

引用

页码：30 / 42

页数：13

共 216 条

[1]

Abdel WahabM. M., 2012, ISRN Mater. Sci, V2012, P1, DOI [10.5402/2012/746308, DOI 10.5402/2012/746308]

[2] Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies [J].

Aissa, B. ;

Therriault, D. ;

Haddad, E. ;

Jamroz, W. .

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2012, 2012

[3] Effects of laminate carbon/epoxy composite patches on the strength of double-strap adhesive joints: Experimental and numerical analysis [J].

Akpinar, Salih .

MATERIALS & DESIGN, 2013, 51 :501-512

[4] Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites [J].

Alessi, Sabina ;

Pitarresi, Giuseppe ;

Spadaro, Giuseppe .

COMPOSITES PART B-ENGINEERING, 2014, 67 :145-153

[5] Mode I fracture in adhesively-bonded joints: A mesh-size independent modelling approach using cohesive elements [J].

Alvarez, D. ;

Blackman, B. R. K. ;

Guild, F. J. ;

Kinloch, A. J. .

ENGINEERING FRACTURE MECHANICS, 2014, 115 :73-95

[6] Mechanical properties of pultruded glass fiber-reinforced plastic after moistening [J].

Aniskevich, K. ;

Aniskevich, A. ;

Arnautov, A. ;

Jansons, J. .

COMPOSITE STRUCTURES, 2012, 94 (09) :2914-2919

[7]

[Anonymous], 2013, AITM10053

[8] Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents - Part I: Experiments [J].

Anyfantis, Konstantinos N. ;

Tsouvalis, Nicholas G. .

COMPOSITE STRUCTURES, 2013, 96 :850-857

[9] Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials [J].

Anyfantis, Konstantinos N. .

COMPOSITE STRUCTURES, 2012, 94 (08) :2632-2639

[10] Considerations for the industrial application of structural adhesive joints in the aluminium-composite material bonding [J].

Arenas, Jose M. ;

Alia, Cristina ;

Narbon, Julian J. ;

Ocana, Rosa ;

Gonzalez, Cristina .

COMPOSITES PART B-ENGINEERING, 2013, 44 (01) :417-423

← 1 2 3 4 5 6 7 8 9 10 →