Performance and Water Consumption of the Solar Steam-Injection Gas Turbine Cycle

被引:8
|
作者
Livshits, Maya [1 ]
Kribus, Abraham [1 ]
机构
[1] Tel Aviv Univ, Sch Mech Engn, IL-69978 Tel Aviv, Israel
来源
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME | 2013年 / 135卷 / 01期
关键词
STIG cycle; steam injection; hybrid cycle; RECOVERY;
D O I
10.1115/1.4007687
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Solar heat at moderate temperatures around 200 degrees C can be utilized for augmentation of conventional steam-injection gas turbine power plants. Solar concentrating collectors for such an application can be simpler and less expensive than collectors used for current solar power plants. We perform a thermodynamic analysis of this hybrid cycle, focusing on improved modeling of the combustor and the water recovery condenser. The cycle's water consumption is derived and compared to other power plant technologies. The analysis shows that the performance of the hybrid cycle under the improved model is similar to the results of the previous simplified analysis. The water consumption of the cycle is negative due to water production by combustion, in contrast to other solar power plants that have positive water consumption. The size of the needed condenser is large, and a very low-cost condenser technology is required to make water recovery in the solar STIG cycle technically and economically feasible. [DOI: 10.1115/1.4007687]
引用
收藏
页数:7
相关论文
共 50 条
  • [31] Thermodynamic analysis of the thermal and exergetic performance of a mixed gas-steam aero derivative gas turbine engine for power generation
    Kok, J. B. W.
    Haselhoff, E. A.
    HELIYON, 2023, 9 (08)
  • [32] Comparative Exergoeconomic Analyses of Gas Turbine Steam Injection Cycles with and without Fogging Inlet Cooling
    Athari, Hassan
    Soltani, Saeed
    Rosen, Marc A.
    Mahmoudi, Seyed Mohammad Seyed
    Morosuk, Tatiana
    SUSTAINABILITY, 2015, 7 (09): : 12236 - 12257
  • [33] MICRO-GAS TURBINE FEED WITH NATURAL GAS AND SYNTHESIS GAS: VARIATION OF THE TURBOMACHINES' OPERATIVE CONDITIONS WITH AND WITHOUT STEAM INJECTION
    Renzi, Massimiliano
    Caligiuri, Carlo
    Rossi, Mose
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 8, 2017,
  • [34] Study on gas turbine performance by nitrogen injection for IGCC power plant
    Aneeq
    Fu, Z. G.
    Iqbal, Tahir
    Shah, Syed Jawad Ali
    Khan, Hasan Izhar
    2019 2ND INTERNATIONAL CONFERENCE ON COMPUTING, MATHEMATICS AND ENGINEERING TECHNOLOGIES (ICOMET), 2019,
  • [35] An Analysis on Efficiency of a Water Injection Gas Turbine with Rotor Air Cooling
    Chan, Lai-Cheong
    Su, Yan
    2012 IEEE INTERNATIONAL CONFERENCE ON POWER AND ENERGY (PECON), 2012, : 200 - 205
  • [36] Comparative analysis of three heating methods for natural gas hydrate production: Electric heating, steam injection, and hot water injection
    Zhang, Zhaobin
    Xu, Tao
    Li, Shouding
    Guo, Peng
    Li, Xiao
    Lu, Cheng
    Sun, Yiming
    Wang, Pingkang
    Qin, Xuwen
    APPLIED THERMAL ENGINEERING, 2025, 269
  • [37] Study of Steam Injection Effect on Course of Combustion Processes in Combustion Chamber of Gas Turbine Unit
    Akhmedzaynov, D. A.
    Kishalov, A. E.
    Lipatov, V. D.
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING, ICIE 2019, VOL II, 2020, : 1483 - 1492
  • [38] Influence of steam injection through exhaust heat recovery on the design performance of solid oxide fuel cell - gas turbine hybrid systems
    Park, Sung Ku
    Kim, Tong Seop
    Sohn, Jeong L.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (02) : 550 - 558
  • [39] Influence of steam injection through exhaust heat recovery on the design performance of solid oxide fuel cell — gas turbine hybrid systems
    Sung Ku Park
    Tong Seop Kim
    Jeong L. Sohn
    Journal of Mechanical Science and Technology, 2009, 23 : 550 - 558
  • [40] Performance improvement for a simple cycle gas turbine GENSET - a retrofitting example
    Wang, FJ
    Chiou, JS
    APPLIED THERMAL ENGINEERING, 2002, 22 (10) : 1105 - 1115