Analyzing Cement Rheological Properties Using Different Additive Schemes at High Pressure and High Temperature Conditions

The experimental study was conducted on rheological properties in laboratory to measure the integrity of cement slurry. Three samples were used and analyzed at different parameters to check the elasticity of cement slurry. Additives with various concentrations, i.e. silica fume % BWOC (Present by Weight on Cement) (15, 17, 19 and 21), dispersant % Wt (Percent Weight) (0.21, 0.26 and 0.31) and additional 1; % Wt of fluid losscontrol were used to improve the performance of the cement slurry at the temperature of 123 degrees C. The results have shown that increase in the concentration of dispersants that have caused to decrease in the Plastic Viscosity (PV), Yield Point (YP) and GS (Gel Strength). The rheological properties of cement were improved with the addition of fluid loss control additive in 21 % BWOC (Present by Weight on Cement) silica fume increase the water quantity in cement slurry that improve its durability and to reduce the strength retrogression in High Temperature High Pressure (HTHP) environment. Results were achieved through HTHP OFITE Viscometer (Model 1100).