Roll casting of a wire inserted strip

被引：0

作者：

Haga, Toshio ^{[1
]}

Takahashi, Kenta ^{[2
]}

Kumai, Shinji ^{[3
]}

Watari, Hisaki ^{[4
]}

机构：

[1] Osaka Inst Technol, Asahi Ku, 5-16-1 Omiya, Osaka 5358585, Japan

[2] Osaka Inst Technol, Grad Sch, Osaka, Japan

[3] Tokyo Inst Technol, Yokohama, Kanagawa 2268502, Japan

[4] Gunma Univ, Kiryu, Gunma 3768515, Japan

来源：

MATERIALS AND MANUFACTURING, PTS 1 AND 2 | 2011年 / 299-300卷

关键词：

twin roll caster; composite strip; strip casting; continuous casting;

D O I：

10.4028/www.scientific.net/AMR.299-300.774

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Casting of a wire-inserted strip was tried by a downward melt drag twin roll caster. Some numbers of wires of 0.3 mm diameter were inserted. Effects of the wire-interval, matrix alloy and melt temperature on the ability of the insertion of the wire were investigated. Minimum interval of the wire, with which the insertion of the wires was able, was 1.6 mm. Insertion of the wire became easy as the roll speed becomes higher. Superheat of the melt was not important factor for the insertion of the wire.

引用

页码：774 / +

页数：2

共 50 条

[41] Roll Casting of Al-40%Sn-1%Cu Alloy Strip [J].

Nakamura, R. ;

Haga, T. ;

Kumai, S. ;

Watari, H. .

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 :1905-+

[42] Strip Casting of 6061 and Recycled 6061 Alloy by an Unequal Diameter Twin Roll Caster [J].

Haga, Toshio ;

Inui, Hideki ;

Nakamura, Ryoji ;

Kumai, Shinji ;

Watari, Hisaki .

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 :1911-+

[43] Study on Hot Roll Profile in the Initial Stage of Twin-Roll Continuous Strip Casting [J].

Zhu Guangming ;

Chang Zheng ;

Xian Xiaoling .

NEW TRENDS IN MECHATRONICS AND MATERIALS ENGINEERING, 2012, 151 :179-+

[44] Study on Temperature Field and Thermal Deformation of Roll Sleeve in Twin-Roll Strip Casting [J].

Chang Zheng ;

Zhu Guangming .

2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL II, 2009, :385-388

[45] Mastering the strip geometrical tolerances with the twin-roll continuous strip-casting technology [J].

Basson, Frederic ;

Bosch, Marc ;

Charlier, Philippe .

LIGHT METALS 2008, 2008, :715-720

[46] Review of the continuous casting of steel by strip casting technology. Twin roll method system [J].

Ibarrondo, I. .

REVISTA DE METALURGIA, 2008, 44 (06) :521-539

[47] Improvement of Porosity of Strip Using a Scraper on the Casting by a Vertical Type High Speed Roll Caster [J].

Haga, Toshio ;

Shiotsu, Yusuke ;

Komeda, Kosuke ;

Kumai, Shinji ;

Warari, Hisaki .

ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 :1108-+

[48] Mechanical properties of magnesium alloy sheets produced by semi-solid roll strip casting [J].

Watari, H ;

Haga, T ;

Davey, K ;

Ona, H ;

Izawa, S ;

Hamano, H ;

Iwashita, T ;

Nakayama, M .

THERMEC'2003, PTS 1-5, 2003, 426-4 :617-622

[49] Casting of Aluminum Alloy Strip by Improved Single-Roll Caster [J].

Akitsu, Kazuya ;

Haga, Toshio ;

Kumai, Shinji ;

Watari, Hisaki .

PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, :29-32

[50] Casting Process at Roll Bite in Strip Cast Using Vertical-Type High-Speed Twin-Roll Caster [J].

Haga, Toshio ;

Kurahashi, Yukihiro .

METALS, 2022, 12 (07)

← 1 2 3 4 5 →