Roll casting of a wire inserted strip

被引：0

作者：

Haga, Toshio ^{[1
]}

Takahashi, Kenta ^{[2
]}

Kumai, Shinji ^{[3
]}

Watari, Hisaki ^{[4
]}

机构：

[1] Osaka Inst Technol, Asahi Ku, 5-16-1 Omiya, Osaka 5358585, Japan

[2] Osaka Inst Technol, Grad Sch, Osaka, Japan

[3] Tokyo Inst Technol, Yokohama, Kanagawa 2268502, Japan

[4] Gunma Univ, Kiryu, Gunma 3768515, Japan

来源：

MATERIALS AND MANUFACTURING, PTS 1 AND 2 | 2011年 / 299-300卷

关键词：

twin roll caster; composite strip; strip casting; continuous casting;

D O I：

10.4028/www.scientific.net/AMR.299-300.774

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Casting of a wire-inserted strip was tried by a downward melt drag twin roll caster. Some numbers of wires of 0.3 mm diameter were inserted. Effects of the wire-interval, matrix alloy and melt temperature on the ability of the insertion of the wire were investigated. Minimum interval of the wire, with which the insertion of the wires was able, was 1.6 mm. Insertion of the wire became easy as the roll speed becomes higher. Superheat of the melt was not important factor for the insertion of the wire.

引用

页码：774 / +

页数：2

共 50 条

[31] Strip Casting by a Single Roll Caster Equipped with a Scraper [J].

Haga, Toshio ;

Akitsu, Kazuya ;

Yamabayashir, Takanori ;

Kumai, Shinji ;

Watari, Hisaki .

ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 :122-+

[32] Casting of clad strip using twin roll caster [J].

Haga T. .

Keikinzoku Yosetsu/Journal of Light Metal Welding, 2020, 58 :132-137

[33] Modeling of solidification in twin-roll strip casting [J].

Santos, CA ;

Spim, JA ;

Garcia, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 102 (1-3) :33-39

[34] Roll Casting of Al-SiCp Composite Strip [J].

Haga, Toshio ;

Nakamura, Teppei ;

Nakamura, Ryoji ;

Harada, Hideto ;

Kumai, Shinji ;

Watari, Hisaki .

MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 :481-+

[35] High speed roll casting of aluminum alloy strip [J].

Haga, T ;

Watari, H ;

Kumai, S .

PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 :343-348

[36] Thermal crown analysis of the roll in the strip casting process [J].

Park, C. M. ;

Choi, J. T. ;

Moon, H. K. ;

Park, G. J. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :3714-3723

[37] SIMULATION OF THE TWIN ROLL STAINLESS STRIP CASTING PROCESS [J].

YC Miao XM Zhang GD Wang HS Di and XH Liu State Key Laboratory of Rolling and Automation Northeastern University Shenyang China .

Acta Metallurgica Sinica(English Edition), 2001, (03) :199-204

[38] Roll Casting of Aluminum Alloy Strip by a Single Roll Caster Equipped with a Scraper [J].

Haga, Toshio ;

Akitsu, Kazuya ;

Kumai, Shinji ;

Watari, Hisaki .

MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 :307-+

[39] Roll Initial Profile Design and Optimization in Twin-roll Strip Casting [J].

Zhu Guangming ;

Chang Zheng .

2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL II, 2009, :891-894

[40] Microstructure of shot-blasting casting roll and effect on strip solidification during strip-casting process [J].

WANG Chengquan ;

YE Changhong ;

ZHANG Yujun ;

YU Yan ;

FANG Yuan .

Baosteel Technical Research, 2019, 13 (02) :32-38

← 1 2 3 4 5 →