Nanomechanical Behavior of CoCrFeMnNi High-Entropy Alloy

被引：19

作者：

Mridha, Sanghita ^{[1
]}

Das, Santanu ^{[1
]}

Aouadi, Samir ^{[1
]}

Mukherjee, Sundeep ^{[1
]}

Mishra, Rajiv S. ^{[1
]}

机构：

[1] Univ N Texas, Dept Mat Sci & Engn, Denton, TX 76203 USA

来源：

JOM | 2015年 / 67卷 / 10期

关键词：

DISLOCATION NUCLEATION; MECHANICAL-PROPERTIES; DEFORMATION-BEHAVIOR; INCIPIENT PLASTICITY; CORROSION PROPERTIES; SINGLE-CRYSTALS; SIZE; NANOINDENTATION; MICROSTRUCTURE; NI3AL;

D O I：

10.1007/s11837-015-1566-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The nanomechanical behavior of the Co20Cr20Fe20Mn20Ni20 high-entropy alloy was investigated in as-cast, rolled, annealed, and thin-film forms. Dislocation nucleation was studied by repeated indents at a low load for each of the different processing conditions. Distinct displacement bursts (pop in) were observed in the loading curve marked by incipient plasticity for all the samples. The as-cast and annealed samples showed pop ins for 100% of the indents, whereas the rolled and thin-film samples showed a much lower fraction of displacement bursts. This was explained by the high density of dislocations for the cold-worked and thin-film conditions. The strong depth dependence of hardness was explained by geometrically necessary dislocations. The nanomechanical behavior and twinned microstructure indicate low stacking-fault energy for this high-entropy alloy.

引用

页码：2296 / 2302

页数：7

共 50 条

[1] Nano-indentation in FCC metals: experimental study [J].

Almasri, Amin H. ;

Voyiadjis, George Z. .

ACTA MECHANICA, 2010, 209 (1-2) :1-9

[2] Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density [J].

Arsenlis, A ;

Parks, DM .

ACTA MATERIALIA, 1999, 47 (05) :1597-1611

[3] DEFORMATION OF PLASTICALLY NON-HOMOGENEOUS MATERIALS [J].

ASHBY, MF .

PHILOSOPHICAL MAGAZINE, 1970, 21 (170) :399-&

[4] Strength differences arising from homogeneous versus heterogeneous dislocation nucleation [J].

Bei, H. ;

Gao, Y. F. ;

Shim, S. ;

George, E. P. ;

Pharr, G. M. .

PHYSICAL REVIEW B, 2008, 77 (06)

[5] Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy [J].

Bhattacharjee, P. P. ;

Sathiaraj, G. D. ;

Zaid, M. ;

Gatti, J. R. ;

Lee, Chi ;

Tsai, Che-Wei ;

Yeh, Jien-Wei .

JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 587 :544-552

[6] Dislocation nucleation in bcc Ta single crystals studied by nanoindentation [J].

Biener, Monika M. ;

Biener, Juergen ;

Hodge, Andrea M. ;

Hamza, Alex V. .

PHYSICAL REVIEW B, 2007, 76 (16)

[7] Microstructural development in equiatomic multicomponent alloys [J].

Cantor, B ;

Chang, ITH ;

Knight, P ;

Vincent, AJB .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218

[8] Nanoindentation measurements of the mechanical properties of polycrystalline Au and Ag thin films on silicon substrates: Effects of grain size and film thickness [J].

Cao, Yifang ;

Allameh, Seyed ;

Nankivil, Derek ;

Sethiaraj, Steve ;

Otiti, Tom ;

Soboyejo, Wole .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 427 (1-2) :232-240

[9] Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys [J].

Chen, Shin-Tsung ;

Tang, Wei-Yeh ;

Kuo, Yen-Fu ;

Chen, Sheng-Yao ;

Tsau, Chun-Huei ;

Shun, Tao-Tsung ;

Yeh, Jien-Wei .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (21-22) :5818-5825

[10] Corrosion properties of a novel bulk Cu0.5NiAlCoCrFeSi glassy alloy in 288°C high-purity water [J].

Chen, Y. Y. ;

Duval, T. ;

Hong, U. T. ;

Yeh, J. W. ;

Shih, H. C. ;

Wang, L. H. ;

Oung, J. C. .

MATERIALS LETTERS, 2007, 61 (13) :2692-2696

← 1 2 3 4 5 →