Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness

被引：4
|
作者：
Darmawan, Agung Setyo [1 ]
Febriantoko, Bambang Waluyo [1 ]
Anggono, Agus Dwi [1 ]
Riyadi, Tri Widodo Besar [1 ]
Hamid, Abdul [2 ]
机构：
[1] Univ Muhammadiyah Surakarta, Fac Engn, Dept Mech Engn, Jl Ahmad Yani,Tromol Pos 1 Pabelan, Surakarta 57162, Indonesia
[2] Univ Batam, Fac Engn, Dept Mech Engn, Batam 29464, Indonesia
来源：
4TH ENGINEERING SCIENCE AND TECHNOLOGY INTERNATIONAL CONFERENCE (ESTIC 2018) | 2018年 / 248卷
关键词：
EVOLUTION; ALLOY; DEFORMATION; TITANIUM; TEXTURE; STEEL;
D O I：
10.1051/matecconf/201824801001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brass is an alloy between copper (Cu) and zinc (Zn) where the majority of the elements are copper. Brass that undergoes a cold rolling process will experience changes in microstructure and mechanical properties. This study aims to find out the effect of cold rolling process on changes in microstructure and hardness of brass. The composition of brass is analyzed by using Energy Dispersive Spectroscopy technique, while microscope optic is used to obtain microstructure photograph of brass. The hardness of brass is measured before and after cold rolling process. The test results show that cold rolling process causes the increase of hardness on brass, change of grain shape, and the appearance of deformation bands on brass.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Effect of cold rolling on microstructure and hardness of annealed Al-Cu-Mg alloy
    Liu, Fei
    Liu, Zhiyi
    He, Guangyu
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2022, 22 (02)
  • [2] Effect of Intermediate Annealing on Microstructure and Cold Rolling Hardness of AlFeMn Alloy
    Pan, Yanfeng
    Shen, Yifu
    Cao, Lingyong
    METALS, 2024, 14 (07)
  • [3] Effect of Cold Rolling and Annealing on the Microstructure and Texture of Erbium Metal
    Chen, Shiying
    Zhang, Xiaowei
    Li, Zongan
    Wang, Shuang
    Wang, Yixuan
    Li, Jinying
    Wu, Daogao
    Wang, Zhiqiang
    Chen, Dehong
    Lu, Wenli
    Mao, Ning
    Yang, Wensheng
    Xu, Minglei
    MATERIALS, 2022, 15 (04)
  • [4] Effect of mode of rolling on development of texture and microstructure in two-phase (α plus β) brass
    Garg, Rohini
    Ranganathan, S.
    Suwas, Satyam
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19): : 4582 - 4592
  • [5] The Effect of Rolling Reduction on the Microstructure Evolution and Slip Behavior of Ta-10W Alloy during Cold Rolling Process
    Park, Ki-Seong
    Kaushik, Lalit
    Yoo, Hyo-Sang
    Jeon, Jae-Yeol
    Choi, Shi-Hoon
    KOREAN JOURNAL OF METALS AND MATERIALS, 2024, 62 (06): : 429 - 444
  • [6] Effect of Cold Rolling Process on Microstructure, Texture and Properties of Strip Cast Fe-2.6%Si Steel
    Xu, Yunbo
    Jiao, Haitao
    Qiu, Wenzheng
    Misra, Raja Devesh Kumar
    Li, Jianping
    MATERIALS, 2018, 11 (07):
  • [7] Effect of cold rolling on microstructure, texture, and tensile properties of a Ni-Fe-based superalloy
    Wang, Jiaqi
    Cheng, Sihan
    Wu, Yunsheng
    Wang, Tingting
    Qin, Xuezhi
    Zhou, Lanzhang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 937
  • [8] The effect of cold rolling reduction ratio on the microstructure and mechanical properties of ferritic stainless steel 430
    Sun, Xiaoyu
    Ma, Xiaoguang
    Li, Jinghui
    Ma, Linan
    Zhang, Mingya
    Zhao, Jingwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (9-10) : 4225 - 4237
  • [9] Effects of thickness reduction in cold rolling process on the formability of sheet metals using ANFIS
    Xie, Yichen
    Wu, Yuping
    Jalali, Arman
    Zhou, Huajie
    Khadimallah, Mohamed Amine
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [10] Influence of Asymmetric Rolling Process and Thickness Reduction on the Microstructure and Mechanical Properties of the Al-Mg-Si Alloy
    Xu, Xuehong
    Deng, Yunlai
    Guo, Xiaobin
    Pan, Qinglin
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (07) : 1620 - 1629
12345