Oxidative steam reforming of glycerol for hydrogen production: Thermodynamic analysis including different carbon deposits representation and CO2 adsorption

被引:15
作者
Diaz Alvarado, Felipe A. [1 ]
Gracia, F. [1 ]
机构
[1] Univ Chile, Fac Ciencias Fis & Matemat, Lab Catalisis & Energia Combustible, Dept Ingn Quim & Biotecnol, Santiago 8370451, Chile
关键词
Hydrogen; Oxidative steam reforming; Glycerol; Thermodynamics; Carbon deposits; CO2; sorption; HYDROTALCITE-LIKE COMPOUNDS; FUEL-CELLS; H-2; PRODUCTION; ETHANOL; CATALYST; CONVERSION; SORBENTS; DIOXIDE;
D O I
10.1016/j.ijhydene.2012.01.158
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Glycerol production is associated with growing biodiesel industry, and because of its poor fuel skills it has been signed as a candidate for hydrogen production by Steam Reforming (SR). In various reforming reaction systems, many different types of Carbon deposits have been reported, but this variety has not been incorporated in thermodynamic studies as previous studies have represented carbon deposits only as Graphite. This work proposes a new representation including Graphite, Carbon Nanotubes, Amorphous, and Polymeric carbon for Glycerol Reforming systems. The study also includes an analysis of CO2 sorption effects, comparing Hydrotalcites and CaO as sorbents, with their respective variation of sorption capacity with temperature. All thermodynamic analysis is performed by Gibbs free energy minimization, following an algorithm for discrete nonlinear minimization. The extended representation of carbon deposits reveals the existence of two regions: below 450 degrees C the most favorable carbonaceous solid type is graphite; and above, carbon nanotubes. The use of CO2 sorbents in Glycerol Reforming systems shifts the equilibrium to products, increasing H-2 yield. In those systems where Hydrotalcites were included as CO2 sorbent, H-2 yield is maximized between 350 degrees C and 450 degrees C and S/G ratio above the stoichiometric ratio, while for CaO sorbent and no sorbent systems the maximization of H-2 yield is given at 600 degrees C and S/G = 10. From the thermodynamic analysis, once the O/G ratio has been chosen according to energetic consideration, it is advisable to carry out the Glycerol Reforming reaction with at least a stoichiometric S/G ratio, the addition of enough mass of Hydrotalcites for stoichiometric CO2 sorption and a temperature between 375 degrees C and 450 degrees C. Those conditions maximize the H-2 yield with no other product gases or carbonaceous solids. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:14820 / 14830
页数:11
相关论文
共 47 条
[31]   Adsorption of CO2 on hydrotalcite-like compounds in a fixed bed [J].
Moreira, RFPM ;
Soares, JL ;
Casarin, GL ;
Rodrigues, AE .
SEPARATION SCIENCE AND TECHNOLOGY, 2006, 41 (02) :341-357
[32]  
Önsan ZI, 2007, TURK J CHEM, V31, P531
[33]   Investigation of ethanol conversion for hydrogen fuel cells using computer simulations [J].
Örücü, E ;
Karakaya, M ;
Avci, AK ;
Önsan, ZI .
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 2005, 80 (10) :1103-1110
[34]   Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy [J].
Osswald, Sebastian ;
Havel, Mickael ;
Gogotsi, Yury .
JOURNAL OF RAMAN SPECTROSCOPY, 2007, 38 (06) :728-736
[35]  
Outokumpu RO, 2002, HSC CHEM 5 1 SOFTWAR
[36]   Hydrogen for fuel cells from ethanol by steam-reforming, partial-oxidation and combined auto-thermal reforming: A thermodynamic analysis [J].
Rabenstein, Gerd ;
Hacker, Viktor .
JOURNAL OF POWER SOURCES, 2008, 185 (02) :1293-1304
[37]   Gibbs free energy minimization for the calculation of chemical and phase equilibrium using linear programming [J].
Rossi, C. C. R. S. ;
Cardozo-Filho, L. ;
Guirardello, R. .
FLUID PHASE EQUILIBRIA, 2009, 278 (1-2) :117-128
[38]   Thermodynamic analysis of steam reforming of ethanol and glycerine for hydrogen production [J].
Rossi, C. C. R. S. ;
Alonso, C. G. ;
Antunes, O. A. C. ;
Guirardello, R. ;
Cardozo-Filho, L. .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2009, 34 (01) :323-332
[39]  
SCHARMER K, 2006, ENGINE FUEL RAPESEED
[40]  
Smith J. M., 1999, INTRO CHEM ENG THERM