EXPERIMENTAL INVESTIGATION OF HYDROGEN EFFECT ON MECHANICAL PROPERTIES OF 304L STAINLESS STEEL

被引：0

作者：

Jiang, Yong ^{[1
]}

Gong, Jianming ^{[1
]}

Tang, Jianqun ^{[1
]}

Geng, Luyang ^{[1
]}

机构：

[1] Nanjing Univ Technol, Coll Mech & Power Engn, Nanjing 210009, Peoples R China

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2008, VOL 6, PT A AND B | 2009年

关键词：

Stainless steel; Hydrogen charging; Hydrogen embrittlement; Mechanical property; STRESS-CORROSION CRACKING; MECHANOCHEMICAL ANODIC-DISSOLUTION; EMBRITTLEMENT;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Hydrogenation reactor is one of the key equipments in the production process of purified terephthalic acid (PTA). The safe and reliable operation of hydrogenation reactor decides the safety of PTA installation. Service experience has shown that some longitudinal cracks occurred on the internal wall of the 304L stainless steel(SS) hydrogen nozzle. In this paper, a series of electrochemical hydrogen charging tests were carried out for 304L stainless steel at the ambient temperature. The comparison on mechanical properties was investigated before and after hydrogen charging in order to investigate the effect of mechanical properties of 304L SS. Fractography was analyzed by using scanning electron microscope (SEM). The results showed that the mechanical strength of 304L SS was not basically lost after hydrogen charging, but the ductility reduced in a certain extent. The fractography also showed the hydrogen embrittlement effect on the fracture.

引用

页码：211 / 216

页数：6

共 50 条

[1] EFFECT OF HYDROGEN ON TENSILE PROPERTIES OF 304L STAINLESS STEEL AT CRYOGENIC TEMPERATURES
Merkel, Daniel R.
Nickerson, Ethan K.
Seffens, Robert J.
Simmons, Kevin L.
San Marchi, Chris
Kagay, Brian J.
Ronevich, Joseph A.
PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 4, 2021,
[2] Effect of Gallium Addition on Mechanical and Antibacterial Properties of 304L Stainless Steel
Meng Yujia
Xi Tong
Yang Chunguang
Zhao Jinlong
Zhang Xinrui
Yu Yingjie
Yang Ke
ACTA METALLURGICA SINICA, 2024, 60 (07) : 890 - 900
[3] Experimental Investigation of Dynamic Strain Aging in 304L Stainless Steel
Antoun, Bonnie R.
Alleman, Coleman
De La Trinidad, Kelsey
CHALLENGES IN MECHANICS OF TIME-DEPENDENT MATERIALS (2018), VOL 2, 2019, : 65 - 72
[4] An experimental investigation of fatigue crack growth of stainless steel 304L
Kanaus, S.
Fan, F.
Jiang, Y.
Vasudevan, A. K.
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (05) : 840 - 849
[5] Hydrogen effect on nitriding process of 304L austenitic stainless steel
Garamoon, A.
Rashed, U. M.
Abouelela, A.
Eissa, M. A.
Saudi, A. H.
El-zeer, D. M.
El-Hossary, F.
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2006, 34 (04) : 1066 - 1073
[6] HYDROGEN EMBRITTLEMENT OF TYPE 304L STAINLESS STEEL
HOLZWORTH, ML
CORROSION, 1969, 25 (03) : 107 - +
[7] Experimental study of electroplastic effect on stainless steel wire 304L
Tang, GY
Zhang, J
Zheng, MX
Zhang, J
Fang, W
Li, Q
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 281 (1-2): : 263 - 267
[8] Impact of hydrogen and crosshead displacement rate on the martensitic transformations and mechanical properties of 304L stainless steel
Claeys, L.
De Graeve, I
Depover, T.
Verbeken, K.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 113
[9] Effect of laser surface cleaning of corroded 304L stainless steel on microstructure and mechanical properties
Yoo, Hyun Jong
Baek, Seungwoo
Kim, Jeoung Han
Choi, Jiyeon
Kim, Yoon-Jun
Park, Changkyoo
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 373 - 385
[10] The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel
Hedayati, Ali
Najafizadeh, Abbas
Kermanpur, Ahmad
Forouzan, Farnoosh
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (08) : 1017 - 1022

← 1 2 3 4 5 →