Effect of electric arc furnace steel slag on the mechanical and fracture properties of roller-compacted concrete

被引：71
作者：
Rooholamini, H. [1 ]
Sedghi, R. [1 ]
Ghobadipour, B. [2 ]
Adresi, M. [3 ]
机构：
[1] Tarbiat Modares Univ, Dept Civil & Environm Engn, Tehran, Iran
[2] Iran Univ Sci & Technol, Sch Civil Engn, Tehran, Iran
[3] Shahid Rajaee Teacher Training Univ, Dept Civil Engn, Tehran, Iran
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2019年 / 211卷
关键词：
Electric arc furnace steel slag; Roller-compacted concrete; Mechanical property; Fracture toughness; MACRO-SYNTHETIC FIBER; BOND BEHAVIOR; AGGREGATE; PAVEMENT; MIXTURES; SPECIMEN; STRENGTH; CEMENT; ASH; CAO;
D O I：
10.1016/j.conbuildmat.2019.03.223
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The present study made an effort to investigate effect of partial and full replacement of natural aggregate with the Electric Arc Furance (EAF) steel slag on the mechanical and fracture properties of Roller Compacted Concrete (RCC). Various concrete mixtures containing fine and coarse EAF steel slag were prepared to find out the impact of each part on the performance of RCC mortar and concrete mixture. To investigate mechanical properties of the mixtures specimens of RCC, different tests were performed, including the splitting tensile, compressive, semi-circular bending and three-point bending tests. The Results showed that fine and coarse EAF steel slag had different impacts on the mechanical properties of the RCC. The results showed that for fine aggregate replacement, obtained mechanical responses decreased by increase in the amount of EAF steel slag, which have the high specific surface area. Besides, incorporating the coarse EAF steel slag increased aggregate interlock mostly due to its high angularity and roughness causing to promote the mechanical and fracture properties. The investigated broken aggregate fraction on the fracture face of beams by image processing and pull-off test results confirmed the mentioned findings. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：88 / 98
页数：11
相关论文
共 47 条
[1]   Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region [J].
Abu-Eishah, Samir I. ;
El-Dieb, Amr S. ;
Bedir, Mostafa S. .
CONSTRUCTION AND BUILDING MATERIALS, 2012, 34 :249-256
[2]   Influence of high content of reclaimed asphalt on the mechanical properties of cement-treated base under critical environmental conditions [J].
Adresi, Mostafa ;
Khishdari, Abolfazl ;
Ahmadi, Amin ;
Rooholamini, Hamed .
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2019, 20 (09) :1098-1105
[3]   A novel test specimen for investigating the mixed mode I plus III fracture toughness of hot mix asphalt composites - Experimental and theoretical study [J].
Aliha, M. R. M. ;
Bahmani, A. ;
Akhondi, Sh. .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2016, 90 :167-177
[4]   Utilization of fine recycled aggregates in concrete with fly ash and steel slag [J].
Anastasiou, E. ;
Filikas, K. Georgiadis ;
Stefanidou, M. .
CONSTRUCTION AND BUILDING MATERIALS, 2014, 50 :154-161
[5]  
[Anonymous], 2012, USE AIR COOLED BLAST
[6]  
[Anonymous], 2009, D454109E1 AASTM INT
[7]  
[Anonymous], 2005, ASTM International, P8, DOI [10.1520/C0633-13, DOI 10.1520/C0633-13, 10.1520/C1698-09.2, DOI 10.1520/C1698-09.2]
[8]   An improved semi-circular bend specimen for investigating mixed mode brittle fracture [J].
Ayatollahi, M. R. ;
Aliha, M. R. M. ;
Saghafi, H. .
ENGINEERING FRACTURE MECHANICS, 2011, 78 (01) :110-123
[9]   Bond characterization between concrete substrate and repairing SFRC using pull-off testing [J].
Bonaldo, E ;
Barros, JAO ;
Lourenço, PB .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2005, 25 (06) :463-474
[10]  
By P., 2014, CONCRETE STEEL FURNA
12345