Tool Wear in Turning of Graphitic Hybrid Metal Matrix Composites

被引：31
作者：
Basavarajappa, S. [1 ]
机构：
[1] Univ BDT Coll Engn, Dept Mech Engn, Davanagere 577004, Karnataka, India
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2009年 / 24卷 / 04期
关键词：
Abrasion; Cutting speed; Cutting tools; Depth of cut; Feed rate; Flank wear; Hybrid metal matrix composites; Machining; Self-lubricating; SEM; Tool wear; Turning; PARTICLE-REINFORCED ALUMINUM; MACHINABILITY; TEMPERATURE; PERFORMANCE;
D O I：
10.1080/10426910802714431
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study presents an experimental investigation on tool wear in machining Al 2219/15SiCp and Al 2219/15SiCp-3Gr (hybrid) composites at different cutting conditions with carbide, coated carbide, and polycrystalline diamond (PCD) tools. An attempt is made in the present investigation to study the effect of graphite incorporation in Al 2219/15SiCp composite on tool wear. The results reveal that the incorporation of graphite in Al 2219/15SiCp composite reduces tool wear at all cutting conditions. This is due to graphite, which reduces the coefficient of friction between tool and workpiece and between tool and chip interface. PCD tool performs better than carbide and coated carbide tools.
引用
收藏
页码：484 / 487
页数：4
相关论文
共 22 条
  • [1] The effect of workpiece temperature on the machinability of an aluminum/SiC MMC
    Barnes, S
    Pashby, IR
    Mok, DK
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (03): : 422 - 427
  • [2] Drilling of hybrid metal matrix composites - Workpiece surface integrity
    Basavarajappa, S.
    Chandramohan, G.
    Prabu, M.
    Mukund, K.
    Ashwin, M.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (01) : 92 - 96
  • [3] Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites
    Ciftci, I
    Turker, M
    Seker, U
    [J]. MATERIALS & DESIGN, 2004, 25 (03) : 251 - 255
  • [4] Diamond tool performance in machining metal-matrix composites
    Davim, JP
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 128 (1-3) : 100 - 105
  • [5] Davis J.R., 1993, ASM SPECIALITY HDB
  • [6] Machining of Al/SiC particulate metal-matrix composites - Part I: Tool performance
    El-Gallab, M
    Sklad, M
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 83 (1-3) : 151 - 158
  • [7] Development of low cost metal matrix composites for commercial applications
    Goñi, J
    Mitxelena, I
    Coleto, J
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (7-8) : 743 - 746
  • [8] Fundamental turning characteristics of a tribology-favored graphite/aluminum alloy composite material
    Hocheng, H
    Yen, SB
    Ishihara, T
    Yen, BK
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (9-10) : 883 - 890
  • [9] Machinability of aluminum alloys reinforced with silicon carbide particulates
    Hung, NP
    Boey, FYC
    Khor, KA
    Phua, YS
    Lee, HF
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 56 (1-4) : 966 - 977
  • [10] PARTICULATE REINFORCED METAL MATRIX COMPOSITES - A REVIEW
    IBRAHIM, IA
    MOHAMED, FA
    LAVERNIA, EJ
    [J]. JOURNAL OF MATERIALS SCIENCE, 1991, 26 (05) : 1137 - 1156
123