DSC ANALYSIS OF ND-FE-B RIBBONS PREPARED BY MELT-SPINNING METHOD WITH DIVERSE COMPOSITIONS AND COOLING RATES

被引：0
作者：
Sabbaghizadeh, R. [1 ]
Shamsudin, R. [1 ]
Deyhimihaghighi, N. [2 ]
Sedghi, A. [3 ]
机构：
[1] Natl Univ Malaysia, Fac Sci & Technol, Dept Phys, Bangi 43600, Selangor, Malaysia
[2] Univ Putra Malaysia, Fac Sci & Technol, Dept Phys, Upm Serdang 43400, Selangor, Malaysia
[3] Fac Engn & Technol, Mat Engn, Qazvin, Iran
来源：
Digest Journal of Nanomaterials and Biostructures | 2016年 / 11卷 / 04期
关键词：
Nd-Fe-B; differential scanning calorimetry (DSC); rapid solidification; MAGNETIC-PROPERTIES; ALLOYS; TI;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Nd9.4Pr0.6Fe77.5-xB6Co6Ga0.5TixCx (x= 0, 1.5, 3, 4.5, 6) Melt-spun ribbons have been prepared at 15, 20 and 25 m/s quenching wheel speeds and were examined by using differential scanning calorimetry (DSC). It is remarkable that peak intensity increases with increasing solidification rate or the higher the Ti and C content of the structure. In both cases, the increased amounts of amorphous phase indicate their strongest peaks in the diagram. Another point related to the crystallization temperature of the ribbons in the presence of Ti and C, which will be discussed in detail in this manuscript.
引用
收藏
页码：1239 / 1244
页数：6
相关论文
共 37 条
  • [21] High coercivity Nd2(Fe,Co)14C-type ribbons prepared by melt spinning
    Zhang, WY
    Zhang, J
    Zhang, SY
    Shen, BG
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2001, 234 (02) : 284 - 288
  • [22] Surface quality, microstructure and magnetic properties of Nd2(Fe,Zr,Co)14B/α-Fe alloys prepared by different melt-spinning equipments
    Wang, C.
    Yan, M.
    [J]. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 164 (02): : 71 - 75
  • [23] Effect of quenching rate on the structural and hard magnetic properties of Nd-Fe-B melt-spun ribbons
    Singh, Sudeep
    Diraviam, Arvindha Babu
    Sarkar, Rajdeep
    Haldar, Arabinda
    Muthuvel, Manivel Raja
    [J]. AIP ADVANCES, 2023, 13 (02)
  • [24] High orientation Nd-Fe-B sintered magnets prepared by wet pressing method
    Cao, Shuai
    Bao, Xiaoqian
    Li, Jiheng
    Yu, Haijun
    Zhu, Kunyuan
    Gao, Xuexu
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2020, 495
  • [25] Increased coercivity for Nd-Fe-B melt spun ribbons with 20 at.% Ce addition: The role of compositional fluctuation and Ce valence state
    Yang, MuNan
    Wang, Hang
    Hu, YongFeng
    Yang, LiuYiMei
    Maclennan, Aimee
    Yang, Bin
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 710 : 519 - 527
  • [26] CRYSTALLIZATION PROCESS AND NON-ISOTHERMAL CRYSTALLIZATION KINETICS OF MELT-SPUN Nd-Fe-B AMORPHOUS THICK RIBBONS
    Wang Dapeng
    Bao Xiaoqian
    Zhang Maocai
    Zhu Jie
    [J]. ACTA METALLURGICA SINICA, 2009, 45 (02) : 237 - 242
  • [27] Effects of Melt-Spinning Speed and Heat Treatment on the Magnetic Properties and Microstructure of Nd26Pr3FebalCo4Ga0.42B0.92 Melt-Spun Ribbons
    Yuan Zikai
    Guo Zhaohui
    Wang Junming
    Zhong Yujiang
    Liu Shuai
    Zhu Minggang
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (06) : 2273 - 2279
  • [28] The magnetic properties, thermal stability and microstructure of Nd-Fe-B/Ga sintered magnets prepared by blending method
    Cheng, WH
    Li, W
    Li, CJ
    Dong, SZ
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2001, 234 (02) : 274 - 278
  • [29] Magnetic properties of Nd-Fe-B nanocomposite films prepared by a new method using pulsed laser deposition
    Fukunaga, H
    Nakano, M
    Matsuura, Y
    Takehara, H
    Yamashita, F
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 408 : 1355 - 1358
  • [30] Effect of Preparation Condition on Magnetic Properties of Nd-Fe-B/α-Fe Multi-Layered Thick Film-Magnets Prepared by PLD Method
    Fukunaga, Hirotoshi
    Kamikawatoko, Takashi
    Tou, Akinori
    Nakano, Masaki
    Yanai, Takeshi
    Yamashita, Fumitoshi
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) : 3154 - 3157
1234