Application of response surface methodology (RSM) to optimize operating conditions during ultrafiltration of oil-in-water emulsion

被引：14

作者：

Sadeghian, Mohsen ^{[1
]}

Sadeghi, Morteza ^{[1
]}

Hesampour, Mehrdad ^{[2
]}

Moheb, Ahmad ^{[1
]}

机构：

[1] Isfahan Univ Technol, Dept Chem Engn, Esfahan 841568311, Iran

[2] Kemira Oyj, R&D Ctr, Espoo, Finland

来源：

DESALINATION AND WATER TREATMENT | 2015年 / 55卷 / 03期

关键词：

Ultrafiltration; Oil-in-water emulsion; PAC; RSM; Optimization; CERAMIC MEMBRANE; ACTIVATED CARBON; WASTE; PERFORMANCE; MICROFILTRATION; FLOCCULATION; COAGULATION;

D O I：

10.1080/19443994.2014.919607

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this research, the capability of ultrafiltration hollow fiber polyvinylidene fluoride membrane by polyaluminum chloride in pretreated oil-in-water emulsion was studied. Central composite design and response surface method were applied to optimize the operating variables: transmembrane pressure (TMP) and velocity. Quadratic models developed for the three responses (permeate flux (PF), turbidity removal, and chemical oxygen demand (COD) removal) indicated that the optimum PF of 50L/m(2)h, turbidity removal of 79%, and COD removal of 77% would be achieved after pretreatment at a TMP of 1bar and velocity of 3m/s. The simulated values obtained from the statistical model were in agreement with the experimental results.

引用

页码：615 / 623

页数：9

共 50 条

[21] Dielectric response of a dilute oil-in-water emulsion solution
Lu, CYD
Yu, JW
CHINESE JOURNAL OF PHYSICS, 2002, 40 (01) : 60 - 68
[22] Coupled CFD-Response Surface Method (RSM) Methodology for Optimizing Jettability Operating Conditions
Couto, Nuno
Silva, Valter
Cardoso, Joao
Gonzalez-Gutierrez, Leo M.
Souto-Iglesias, Antonio
CHEMENGINEERING, 2018, 2 (04) : 1 - 19
[23] Polymerization of propylene with Ziegler–Natta catalyst: optimization of operating conditions by response surface methodology (RSM)
Hanieh Nassiri
Hassan Arabi
Shokoufeh Hakim
Shiva Bolandi
Polymer Bulletin, 2011, 67 : 1393 - 1411
[24] APPLICATION OF RESPONSE SURFACE METHODOLOGY (RSM) TO OPTIMIZE THE ADSORPTION CONDITIONS OF CATIONIC BASIC YELLOW 2 ONTO PUMICE SAMPLES AS A NEW ADSORBENT
Ozturk, Dilara
Sahan, Tekin
Bayram, Tuba
Erkus, Ayse
FRESENIUS ENVIRONMENTAL BULLETIN, 2017, 26 (05): : 3285 - 3292
[25] Variation of Oil Introduction Behaviour during Oil-in-Water Emulsion Rolling
Nakanishi, Hironobu
Saiki, Kozo
Hirayama, Tomoko
Matsuoka, Takashi
MATERIALS TRANSACTIONS, 2013, 54 (08) : 1408 - 1415
[26] Optimization on the Stability of Coconut Oil in Water Emulsion Using Response Surface Methodology
Yoo, Bong-Ho
Zuo, Chengliang
Lee, Seung Bum
APPLIED CHEMISTRY FOR ENGINEERING, 2019, 30 (05): : 530 - 535
[27] Friction and Surface Temperature of Wet Hair Containing Water, Oil, or Oil-in-Water Emulsion
Aita, Yuuki
Nonomura, Yoshimune
JOURNAL OF OLEO SCIENCE, 2016, 65 (06) : 493 - 498
[28] Optimization of operating conditions for the acidification metabolites production with waste sludge using response surface methodology (RSM)
Yu Wang
Liang Guo
Jiawen Zhang
Zonglian She
Chunji Jin
Mengchun Gao
Yangguo Zhao
Environmental Science and Pollution Research, 2019, 26 : 30303 - 30312
[29] Optimization of operating conditions for the acidification metabolites production with waste sludge using response surface methodology (RSM)
Wang, Yu
Guo, Liang
Zhang, Jiawen
She, Zonglian
Jin, Chunji
Gao, Mengchun
Zhao, Yangguo
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2019, 26 (29) : 30303 - 30312
[30] Polymerization of propylene with Ziegler-Natta catalyst: optimization of operating conditions by response surface methodology (RSM)
Nassiri, Hanieh
Arabi, Hassan
Hakim, Shokoufeh
Bolandi, Shiva
POLYMER BULLETIN, 2011, 67 (07) : 1393 - 1411

← 1 2 3 4 5 →