The influence of paper coating content on room temperature sintering of silver nanoparticle ink

被引：22

作者：

Andersson, H. ^{[1
]}

Manuilskiy, A. ^{[1
]}

Lidenmark, C. ^{[2
]}

Gao, J. ^{[1
]}

Ohlund, T. ^{[3
]}

Forsberg, S. ^{[2
]}

Ortegren, J. ^{[3
]}

Schmidt, W. ^{[4
]}

Nilsson, H-E ^{[1
]}

机构：

[1] Mid Sweden Univ, Dept Elect Design, SE-85170 Sundsvall, Sweden

[2] Mid Sweden Univ, Dept Nat Sci, SE-85170 Sundsvall, Sweden

[3] Mid Sweden Univ, Digital Printing Ctr, Dept Nat Sci, SE-89118 Ornskoldsvik, Sweden

[4] Schoeller Technocell GmbH & Co KG, Burg Gretesch, D-49086 Osnabruck, Germany

来源：

NANOTECHNOLOGY | 2013年 / 24卷 / 45期

关键词：

ELECTRICAL PERFORMANCE; AGGREGATION; COMPONENTS;

D O I：

10.1088/0957-4484/24/45/455203

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The resistance of inkjet printed lines using a silver nanoparticle based ink can be very dependent on the substrate. A very large difference in resistivity was observed for tracks printed on paper substrates with aluminum oxide based coatings compared to silica based coatings. Silica based coatings are often cationized with polymers using chloride as a counter ion. It is suggested that the precipitation of silver salts is the cause of the high resistivity, since papers pretreated with salt solutions containing ions that precipitate silver salts gave a high resistance. Silver nitrate has a high solubility and paper pretreated with nitrate ions gave a low resistivity without sintering. The results obtained show that, by choosing the correct type of paper substrate, it is possible to manufacture printed structures, such as interconnects on paper, without the need for, or at least to reduce the need for, post-print sintering. This phenomenon is, of course, ink specific. Inks without or with a low silver ion content are not expected to behave in this manner. In some sensor applications, a high resistivity is desired and, by using the correct combination of ink and paper, these types of sensors can be facilitated.

引用

页数：9

共 38 条

[1]

ALASTALO A, 2010, P LOPE C, P8

[2] Substrate-facilitated nanoparticle sintering and component interconnection procedure [J].

Allen, Mark ;

Leppaniemi, Jaakko ;

Vilkman, Marja ;

Alastalo, Ari ;

Mattila, Tomi .

NANOTECHNOLOGY, 2010, 21 (47)

[3] Electrical sintering of nanoparticle structures [J].

Allen, Mark L. ;

Aronniemi, Mikko ;

Mattila, Tomi ;

Alastalo, Ari ;

Ojanpera, Kimmo ;

Suhonen, Mika ;

Seppa, Heikki .

NANOTECHNOLOGY, 2008, 19 (17)

[4] Applicability of Metallic Nanoparticle Inks in RFID Applications [J].

Allen, Mark L. ;

Jaakkola, Kaarle ;

Nummila, Kaj ;

Seppa, Heikki .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2009, 32 (02) :325-332

[5] Inkjet Printed Silver Nanoparticle Humidity Sensor With Memory Effect on Paper [J].

Andersson, Henrik ;

Manuilskiy, Anatoliy ;

Unander, Tomas ;

Lidenmark, Cecilia ;

Forsberg, Sven ;

Nilsson, Hans-Erik .

IEEE SENSORS JOURNAL, 2012, 12 (06) :1901-1905

[6]

[Anonymous], P IEEE ANT PROP SOC

[7] Creating screen-printed passive components for microwave applications [J].

Arenas, Osvaldo J. ;

de la Larrige, Emilie Leynia ;

Boone, Francois .

MICROELECTRONICS INTERNATIONAL, 2010, 27 (02) :84-92

[8] Ink-jet fabrication of electronic components [J].

Bidoki, S. M. ;

Lewis, D. M. ;

Clark, M. ;

Vakorov, A. ;

Millner, P. A. ;

McGorman, D. .

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (05) :967-974

[9]

Dransmann G, 1999, US Patent Specification, Patent No. [5,911,855, 5911855]

[10] Impact of Environmental Conditions (pH, Ionic Strength, and Electrolyte Type) on the Surface Charge and Aggregation of Silver Nanoparticles Suspensions [J].

El Badawy, Amro M. ;

Luxton, Todd P. ;

Silva, Rendahandi G. ;

Scheckel, Kirk G. ;

Suidan, Makram T. ;

Tolaymat, Thabet M. .

ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2010, 44 (04) :1260-1266

← 1 2 3 4 →