共 29 条
Chemical oxidation of N,N-diethyl-m-toluamide by sulfate radical-based oxidation: kinetics and mechanism of degradation
被引:17
作者:
Tay, K. S.
[1
]
Rahman, N. A.
[1
]
Bin Abas, M. R.
[1
]
机构:
[1] Univ Malaya, Dept Chem, Fac Sci, Environm Res Grp, Kuala Lumpur 50603, Malaysia
关键词:
Advanced oxidation processes;
Kinetics;
Mechanism;
Peroxymonosulfate;
Monosulfate;
WASTE-WATER CONTAMINANTS;
ANODIC FENTON TREATMENT;
RATE CONSTANTS;
PEROXYMONOSULFATE;
PHARMACEUTICALS;
ANION;
DEET;
ACTIVATION;
OZONATION;
HYDROXYL;
D O I:
10.1007/s13762-012-0081-3
中图分类号:
X [环境科学、安全科学];
学科分类号:
08 ;
0830 ;
摘要:
A study was undertaken in order to understand the kinetics and mechanism of the chemical oxidation of N,N-diethyl-m-toluamide, an insect repellent, by sulfate radical. In this experiment, sulfate radical was generated using peroxymonosulfate with iron(II) and cobalt(II) as activator. The second-order rate constant for the reaction of the sulfate radical with N,N-diethyl-m-toluamide was found to be (1.9 +/- A 0.1) x 10(9) M-1 s(-1) at pH 7 and a temperature of 25 A degrees C. Experiments for the chemical oxidation of N,N-diethyl-m-toluamide in river water and secondary wastewater revealed that the percentage of the removal of N,N-diethyl-m-toluamide was slightly influenced by the water matrices. However, the selected oxidation systems are not effective for the removal of N,N-diethyl-m-toluamide in seawater. Transformation by-products of N,N-diethyl-m-toluamide generated using peroxymonosulfate/iron(II) sulfate, peroxymonosulfate/iron(II) chloride, peroxymonosulfate/cobalt(II) sulfate and peroxymonosulfate/cobalt(II) chloride systems were identified. The results indicated that there are slight differences in the distributions of the transformation by-products detected depending on the activator. The common transformation by-products detected in all selected oxidation systems are N,N-diethylbenzamide, N-ethyl-m-toluamide, N,N-dimethyl-m-toluamide, N-ethyl-N-acetyl-m-toluamide, 2-(diethylamino)-1-m-tolylethanone, monohydroxylated N-ethyl-m-toluamide, and dihydroxylated N,N-diethyl-m-toluamide. Monohydroxylated N,N-diethyl-m-toluamide were detected only when the peroxymonosulfate/iron(II) system was applied. For the peroxymonosulfate/cobalt(II) systems, additional isomers of monohydroxylated N-ethyl-m-toluamide were detected. Peroxymonosulfate/cobalt(II) also transformed 2-(diethylamino)-1-m-tolylethanone into N-ethyl-N-(2-oxo-2-m-tolylethyl)acetamide and monohydroxylated 2-(ethyl(vinyl)amino)-1-m-tolylethanone as transformation by-products.
引用
收藏
页码:103 / 112
页数:10
相关论文