Lower Distortion in Trajectory planning for a Rigid-flexible Manipulator Based on PSO Algorithm

被引:0
作者
Yin, Hai Bin [1 ]
Jiang, Ni Cong [2 ]
Xu, Jin Li [1 ]
Huang, Feng Yun [1 ]
机构
[1] Wuhan Univ Technol, Sch Mech & Elect Engn, Wuhan 430076, Hubei, Peoples R China
[2] Shandong Univ, Sch Mech Engn, Shandong 250061, Peoples R China
来源
MECHATRONICS AND APPLIED MECHANICS II, PTS 1 AND 2 | 2013年 / 300-301卷
基金
中国国家自然科学基金;
关键词
Flexible manipulator; trajectory planning; lower distortion; optimization; PSO; MOTION;
D O I
10.4028/www.scientific.net/AMM.300-301.458
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents a novel trajectory planning for a multilink rigid-flexible manipulator. An original trajectory is given according to the site condition and requirement of motion, and desired trajectory is determined by using an optimization. To satisfy the requirement of motion with restrictions, the desired trajectory cannot significantly deviate from the original trajectory. Consequently, the lower distortion in trajectory planning should be considered in optimization algorithm Two different formulations of trajectory are introduced in two optimization algorithms to compare the distortion degree. Finally, the calculation samples are addressed by using specific site conditions and requirements of motion to verify the validity of proposal.
引用
收藏
页码:458 / +
页数:2
相关论文
共 12 条
[1]   Trajectory planning for residual vibration suppression of a two-link rigid-flexible manipulator considering large deformation [J].
Abe, Akira .
MECHANISM AND MACHINE THEORY, 2009, 44 (09) :1627-1639
[2]   Rest-to-rest motion for planar multi-link flexible manipulator through backward recursion [J].
Benosman, M ;
Le Vey, G ;
Lanari, L ;
De Luca, A .
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2004, 126 (01) :115-123
[3]   Synthesis of dynamic motions for robotic manipulators with geometric path constraints [J].
Chettibi, Taha .
MECHATRONICS, 2006, 16 (09) :547-563
[4]  
Haibin Yin, 2011, Journal of System Design and Dynamics, V5, P219, DOI 10.1299/jsdd.5.219
[5]  
Haibin Yin, 2010, Proceedings of the 2010 IEEE/SICE International Symposium on System Integration (SII 2010), P359, DOI 10.1109/SII.2010.5708352
[6]   FORMULATION AND OPTIMIZATION OF CUBIC POLYNOMIAL JOINT TRAJECTORIES FOR INDUSTRIAL ROBOTS [J].
LIN, CS ;
CHANG, PR ;
LUH, JYS .
IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 1983, 28 (12) :1066-1074
[7]  
Muñoz VF, 1999, INTEGR COMPUT-AID E, V6, P331
[8]   FOURIER-BASED OPTIMAL-DESIGN OF A FLEXIBLE MANIPULATOR PATH TO REDUCE RESIDUAL VIBRATION OF THE END-POINT [J].
PARK, K ;
PARK, Y .
ROBOTICA, 1993, 11 :263-272
[9]   The application of command shaping to the tracking problem [J].
Reynolds, Michael C. ;
Meckl, Peter H. .
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2008, 130 (03)
[10]   Modified input shaping for a rotating single-link flexible manipulator [J].
Shan, JJ ;
Liu, HT ;
Sun, D .
JOURNAL OF SOUND AND VIBRATION, 2005, 285 (1-2) :187-207