A study of nitrogen effect on the characteristics of creep-rupture in 18Cr-9Ni austenitic steels

被引:3
|
作者
Shin, JK
Nam, SW
Lee, SC
机构
[1] Korea Adv Inst Sci & Technol, Dept Mat Sci & Engn, Taejon 305701, South Korea
[2] POSCO, Tech Res Lab, Stainless Steel Res Grp, Pohang, South Korea
来源
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 | 2005年 / 297-300卷
关键词
creep-rupture; nitrogen; carbide; austenitic stainless steel; STAINLESS-STEEL; FATIGUE INTERACTION; CAVITY NUCLEATION; LIFE PREDICTION;
D O I
10.4028/www.scientific.net/KEM.297-300.409
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
To understand the effects of nitrogen on high temperature, creep-rupture tests have been conducted at 973 and 1073K for 18Cr-9Ni austenitic stainless steels with 0.14 and 0.08wt% nitrogen contents. It is observed that creep-rupture life of 18Cr-9Ni-0.14N steel is longer than that of 18Cr-9Ni-0.08N steel. To verify the difference in creep-rupture life between two alloys, scanning electron microscope and transmission electron microscopy are used to observe the microstructure. From the observations, it is known that the Cr-rich carbides are precipitated mainly at the grain boundary. Comparing the ratio of the linear density of the precipitate particles, the higher nitrogen content is, the less carbide is precipitated. Nitrogen might retard the formation of carbides at the grain boundary and reduce the density of cavity sites which are one of the main gain boundary damages.
引用
收藏
页码:409 / 414
页数:6
相关论文
共 50 条
  • [41] Tribological Behavior of Plasma Nitrided 1Cr18Ni9Ti Austenitic Stainless Steel Under the Effect of Lubricant Additives
    Fang, Jian
    Xia, Yanqiu
    Lin, Yimin
    Liu, Weimin
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (03): : 1 - 8
  • [42] The friction-induced microstructures changes of 18Cr-8Ni austenitic stainless steels with different grain sizes
    Liu, J.
    Wang, H. J.
    Huang, L.
    Ma, X.
    Deng, X. T.
    Wang, Z. D.
    MATERIALS RESEARCH EXPRESS, 2024, 11 (01)
  • [43] Thermal treatment improving creep properties of nitrogen-added Mod.9Cr-1Mo steels
    Woo Seog Ryu
    Sung Ho Kim
    Transactions of the Indian Institute of Metals, 2010, 63 : 111 - 115
  • [44] Thermal treatment improving creep properties of nitrogen-added Mod.9Cr-1Mo steels
    Ryu, Woo Seog
    Kim, Sung Ho
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2010, 63 (2-3): : 111 - 115
  • [45] Cyclic deformation behavior of austenitic Cr-Ni-steels in the VHCF regime: Part I - Experimental study
    Grigorescu, A. C.
    Hilgendorff, P. -M.
    Zimmermann, M.
    Fritzen, C. -P.
    Christ, H. -J.
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 93 : 250 - 260
  • [46] Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe-18Cr-10Mn-N steels
    Lee, Tae-Ho
    Oh, Chang-Seok
    Kim, Sung-Joon
    SCRIPTA MATERIALIA, 2008, 58 (02) : 110 - 113
  • [47] Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr-W steels
    Abe, F
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 : 565 - 569
  • [49] Effect of sulphate-reducing bacteria on the electrochemical impedance spectroscopy characteristics of 1Cr18Ni9Ti
    Liu, Jianhua
    Liang, Xin
    Li, Songmei
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2007, 14 (05): : 425 - 430
  • [50] Precipitate Evolution in a Modified 25Cr-20Ni Austenitic Heat Resistant Stainless Steel During Creep Rupture Test at 750 °C
    Hu Guodong
    Wang Pei
    Li Dianzhong
    Li Yiyi
    ACTA METALLURGICA SINICA, 2018, 54 (11) : 1705 - 1714