A study of nitrogen effect on the characteristics of creep-rupture in 18Cr-9Ni austenitic steels

被引:3
|
作者
Shin, JK
Nam, SW
Lee, SC
机构
[1] Korea Adv Inst Sci & Technol, Dept Mat Sci & Engn, Taejon 305701, South Korea
[2] POSCO, Tech Res Lab, Stainless Steel Res Grp, Pohang, South Korea
来源
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 | 2005年 / 297-300卷
关键词
creep-rupture; nitrogen; carbide; austenitic stainless steel; STAINLESS-STEEL; FATIGUE INTERACTION; CAVITY NUCLEATION; LIFE PREDICTION;
D O I
10.4028/www.scientific.net/KEM.297-300.409
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
To understand the effects of nitrogen on high temperature, creep-rupture tests have been conducted at 973 and 1073K for 18Cr-9Ni austenitic stainless steels with 0.14 and 0.08wt% nitrogen contents. It is observed that creep-rupture life of 18Cr-9Ni-0.14N steel is longer than that of 18Cr-9Ni-0.08N steel. To verify the difference in creep-rupture life between two alloys, scanning electron microscope and transmission electron microscopy are used to observe the microstructure. From the observations, it is known that the Cr-rich carbides are precipitated mainly at the grain boundary. Comparing the ratio of the linear density of the precipitate particles, the higher nitrogen content is, the less carbide is precipitated. Nitrogen might retard the formation of carbides at the grain boundary and reduce the density of cavity sites which are one of the main gain boundary damages.
引用
收藏
页码:409 / 414
页数:6
相关论文
共 50 条
  • [21] EFFECT OF BORON ON CREEP DUCTILITY AND CREEP RUPTURE LIFE IN 9CR-1.5MO STEEL
    Kim, Bumjoon
    Im, Jiwoo
    Kim, Moon K.
    Lee, Jonghoon
    Lim, Byeongsoo
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (15-16): : 2490 - 2495
  • [22] Long-term creep-rupture strength prediction for modified 9Cr-1Mo ferritic steel and type 316L(N) austenitic stainless steel
    Srinivasan, V. S.
    Choudhary, B. K.
    Mathew, M. D.
    Jayakumar, T.
    MATERIALS AT HIGH TEMPERATURES, 2012, 29 (01) : 41 - 48
  • [23] The Effect of Hydrogenation on Structure and Strength Properties of Austenitic Stainless Steel Fe-18Cr-9Ni-Ti
    Astafurova, Elena G.
    Melnikov, Eugene V.
    Maier, Galina G.
    Tukeeva, Marina S.
    INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014, 2014, 1623 : 23 - 26
  • [24] Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steel
    Li, Qiushu
    Song, Changjiang
    Li, Haibin
    Zhai, Qijie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 466 (1-2): : 101 - 105
  • [25] Effect of nitrogen on weld solidification cracking susceptibility of Fe-25%Cr-22%Ni-P-N fully austenitic stainless steels
    Yoshioka Y.
    Fukumoto S.
    Welding International, 2019, 33 (7-9) : 255 - 267
  • [26] Effect of nitrogen on weld solidification cracking susceptibility of Fe-25%Cr-22%Ni-p-N fully austenitic stainless steels
    Yoshioka Y.
    Fukumoto S.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2019, 37 (04): : 133 - 140
  • [27] Kinetics of carbide precipitation during creep and its effect on creep rate of 10Cr-30Mn austenitic steels
    Abe, F
    MATERIALS TRANSACTIONS JIM, 1998, 39 (01): : 211 - 217
  • [28] Effect of N, Mo, and Si on Local Corrosion Resistance of Unstabilized Cr-Ni and Cr-Mn-Ni Austenitic Steels
    Pisarevskii, L. A.
    Filippov, G. A.
    Lipatov, A. A.
    METALLURGIST, 2016, 60 (7-8) : 822 - 831
  • [29] Influence of nitrogen alloying on properties of Fe-18Cr-12Mn-XN austenitic stainless steels
    Behjati, P.
    Kermanpur, A.
    Najafizadeh, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 43 - 48
  • [30] Effect of rare earth alloying on creep rupture of economical 21Cr-11Ni-N heat-resistant austenitic steel at 650 ℃
    陈雷
    龙红军
    刘鑫刚
    金淼
    马筱聪
    Journal of Rare Earths, 2016, 34 (04) : 447 - 452