Flexural fatigue behavior of thin laminated cementitious composites incorporating cenosphere fillers

被引:37
作者
Hanif, Asad [1 ,2 ]
Usman, Muhammad [3 ]
Lu, Zeyu [4 ]
Cheng, Yu [1 ]
Li, Zongjin [4 ]
机构
[1] Hong Kong Univ Sci & Technol, Dept Civil & Environm Engn, Kowloon, Hong Kong, Peoples R China
[2] Mirpur Univ Sci & Technol, Dept Civil Engn, Mirpur, Ajk, Pakistan
[3] Natl Univ Sci & Technol, Sch Civil & Environm Engn, Sect H 12, Islamabad, Pakistan
[4] Univ Macau, Inst Appl Phys & Mat Engn, Taipa, Macao, Peoples R China
关键词
Flexure; Fatigue; Lightweight; Cement-based composite; Laminated composite; Fly ash cenosphere; FLY-ASH CENOSPHERES; FIBER-REINFORCED-CONCRETE; LIGHTWEIGHT; PERFORMANCE; STRENGTH; MORTAR; MODELS;
D O I
10.1016/j.matdes.2017.12.003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Flexural fatigue behavior of thin laminated cementitious composites (LCCs) is evaluated in this paper. LCCs were developed by incorporating fly ash cenosphere (FAC), as lightweight filler material, in various weight fractions of 40%, 50%, and 60%. The composites were reinforced with continuous reinforcement (welded wire mesh and woven glass fibermesh), and discontinuous reinforcement (PVA fibers). Both single and double layer reinforced composites were cast. The developed composites were tested for static flexural strength as well as flexural fatigue strength under three - point flexural loading. The fatigue lives of LCC were determined at various stress levels and stress ratios. The results thus obtained are used to develop S-N relationships, and equations have been proposed to predict the flexural fatigue strength of LCC. The results indicate that the probabilistic distribution of fatigue life of LCC can be modeled by two-parameter Weibull distribution. The Weibull distribution has been employed to incorporate the failure probabilities into the fatigue life of LCC. The fatigue lives corresponding to different failure probabilities have been calculated and the data so obtained have been used to generate Pf-S-N diagrams. It is found that FAC is useful in producing structural lightweight composites with enhanced ductility and improved flexural fatigue characteristics. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:267 / 277
页数:11
相关论文
共 60 条
[1]  
ACI 549.2R, 2004, 5492R ACI
[2]  
ACI (American Concrete Institute), 1997, 549R97 ACI
[3]  
ACI (American Concrete Institute Committee), 2003, 213 ACI
[4]  
[Anonymous], 1999, Updated Knowledge of the CEB/FIP Model Code 1990, V2, P37
[5]  
[Anonymous], 2003, C39C39M99 ASTM
[6]  
[Anonymous], 1997, C34897 ASTM
[7]  
[Anonymous], 1999, American Standard for Testing and Materials, P1
[8]  
[Anonymous], 1999, 5491R93 ACI
[9]  
ASTM, 2010, D79010 ASTM
[10]  
*ASTM, 2003, C230 ASTM