Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique

被引：98
|
作者：
Yelbay, H. Ilker [1 ]
Cam, Ibrahim [2 ]
Guer, C. Hakan [1 ,3 ]
机构：
[1] Middle E Tech Univ, Welding Technol & Nondestruct Testing Res Applica, TR-06531 Ankara, Turkey
[2] Middle E Tech Univ, Cent Lab, TR-06531 Ankara, Turkey
[3] Middle E Tech Univ, Dept Met & Mat Engn, TR-06531 Ankara, Turkey
来源：
NDT & E INTERNATIONAL | 2010年 / 43卷 / 01期
关键词：
Welding; Residual stress; Non-destructive evaluation; Magnetic Barkhausen Noise;
D O I：
10.1016/j.ndteint.2009.08.003
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The purpose of this study is non-destructive determination of residual stresses in the welded steel plates by Magnetic Barkhausen Noise (MBN) technique. A MBN-stress calibration set-up and a residual stress measurement system with scanning ability were developed. To control the accuracy and the effectiveness of the developed system and procedure, various MBN measurements were carried out. The MBN results were verified by the hole-drilling method. Microstructural investigation and hardness measurements were also conducted. It was concluded that if the calibration procedure including the effect of microstructure is appropriate then MBN is a very promising method for non-destructive, fast and accurate prediction of residual stresses in the welded plates. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：29 / 33
页数：5
相关论文
共 50 条
  • [1] Application of magnetic Barkhausen noise in non-destructive testing fields of residual stress
    尹何迟
    张光业
    陈立功
    倪纯珍
    China Welding, 2007, (02) : 22 - 26
  • [2] Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Martensitic Stainless Steel Using the Magnetic Barkhausen Noise Technique
    Yelbay, Hasan Ilker
    Gur, Cemil Hakan
    METALS, 2025, 15 (03)
  • [3] Measurement of residual stress in steel using the magnetic Barkhausen noise technique
    Gauthier, J
    Krause, TW
    Atherton, DL
    NDT & E INTERNATIONAL, 1998, 31 (01) : 23 - 31
  • [4] Measurement of residual stress in steel using the magnetic Barkhausen noise technique
    Gauthier, J.
    Krause, T.W.
    Atherton, D.L.
    NDT and E International, 1998, 31 (01): : 23 - 31
  • [5] Non-destructive scanning for applied stress by the continuous magnetic Barkhausen noise method
    Franco Grijalba, Freddy A.
    Padovese, L. R.
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2018, 446 : 231 - 238
  • [6] Non-destructive Evaluation of Milled Surfaces of a Hard Bearing Steel by the Barkhausen Noise Technique
    Stupakov, Alexandr
    Neslusan, Miroslav
    Uchimoto, Tetsuya
    Takagi, Toshiyuki
    ELECTROMAGNETIC NONDESTRUCTIVE EVALUATION (XIX), 2016, 41 : 102 - 109
  • [7] Temper embrittlement of supermartensitic stainless steel and non-destructive inspection by magnetic Barkhausen noise
    Tavares, S. S. M.
    Noris, L. F.
    Pardal, J. M.
    da Silva, M. R.
    ENGINEERING FAILURE ANALYSIS, 2019, 100 : 322 - 328
  • [8] Investigating the Effects of Subsequent Weld Passes on Surface Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Technique
    Gur, C. Hakan
    Erian, Gokhan
    Batigun, Caner
    Cam, Ibrahim
    MATERIALS EVALUATION, 2016, 74 (03) : 418 - 423
  • [9] NON DESTRUCTIVE EVALUATION OF STRESS STATE OF THE HIGHWAY BRIDGE VIA BARKHAUSEN NOISE TECHNIQUE
    Zgutova, Katarina
    Neslusan, Miroslav
    Kolarik, Kamil
    Sramek, Juraj
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 875 - 882
  • [10] NONDESTRUCTIVE MONITORING OF VARIATIONS OF RESIDUAL STRESSES IN STEEL WELDMENTS BY MAGNETIC BARKHAUSEN NOISE METHOD
    Gur, C. Hakan
    Erian, Gokhan
    Batigun, Caner
    Cam, Ibrahim
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 3: DESIGN AND ANALYSIS, 2014,
12345