Failure analysis of H13 steel die for high pressure die casting Al alloy

被引：40

作者：

Ding, Rengen ^{[1
]}

Yang, Haibo ^{[1
]}

Li, Shuzhi ^{[1
]}

Hu, Guodong ^{[1
]}

Mo, Jiahao ^{[1
]}

Chu, Mingqiang ^{[1
]}

Paddea, Sanjoo ^{[1
]}

Zhang, Shuyan ^{[1
]}

Zhang, Peng ^{[1
]}

Liu, Zhongren ^{[2
]}

Wei, Junjun ^{[2
]}

机构：

[1] Ctr Excellence Adv Mat, Dongguan, Peoples R China

[2] Silver Basis Technol Co LTD, Shenzhen, Guangdong, Peoples R China

来源：

ENGINEERING FAILURE ANALYSIS | 2021年 / 124卷

关键词：

Failure analysis; H13; steel; Die; Residual stress; Electron microscopy;

D O I：

10.1016/j.engfailanal.2021.105330

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

High pressure die casting (HPDC) die is operated at severe conditions such as high pressure, high temperature and corrosion, which limit its service life. Analysis of failure mechanism of the die is beneficial to guide die design and choose of materials so as to improve the die life. A failed H13 steel die which was used to manufacture a 5G component via Al alloy HPDC, has been investigated using a complementary range of techniques such as X-ray diffractometer (XRD), Optical microscopy (OM), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM). The results show that erosion and cracking are two main failure modes. Furthermore, the fatal cracking occurs around fillet radius and hole/insert, which is correlated with high local stresses.

引用

页数：13

共 23 条

[11] Thermo fatigue cracking of die casting dies [J].