Development of chipless and wireless underground temperature sensor system based on magnetic antennas and SAW sensor

被引：31

作者：

Kim, Sihyeok ^{[1
]}

Adib, Md Ridwan ^{[1
]}

Lee, Keekeun ^{[1
]}

机构：

[1] Ajou Univ, Dept Elect & Comp Engn, Suwon 16499, Gyeonggi Do, South Korea

来源：

SENSORS AND ACTUATORS A-PHYSICAL | 2019年 / 297卷

关键词：

Wireless underground sensor; SAW resonator; SAW reflective delay line; Magnetic coil antenna; NiFe core; DELAY-LINE; NETWORKS; DESIGN;

D O I：

10.1016/j.sna.2019.111549

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A chipless and wireless underground sensor system was developed based on two magnetic coil antennas with magnetic cores and a surface acoustic wave (SAW) resonator sensor to monitor temperature variations around buried utilities from the ground. A similar to 250 MHz alternating current from the magnetic antenna generates a SAW along the piezoelectric substrate, and the returned SAW energy owing to the reflection bars on the sensor is reconverted to magnetic flux by the sensor's interdigital transducer (IDT) and subsequently transmitted to a reader via magnetic antenna. By observing changes in the center frequency of the SAW sensor with temperature, we were able to monitor the underground temperature variations in real time. The developed magnetic coil antenna has a large diameter Ni0.8Fe0.2 core wound by Cu coil, and a convex shape at the core end to converge the magnetic flux and enhance the readout distance. Two types of temperature sensors, a one-port SAW resonator and two-port SAW reflective delay line, were fabricated on a 128 degrees YX LiNbO3 and their characteristics were compared in terms of soil temperature. SAW generation by magnetic antenna followed by SAW propagation along the piezoelectric substrate were each confirmed by the AC voltages derived at the output IDT on the SAW sensor, and the amplitude of the SAW was greatly dependent on the current applied to the coil. In soil testing, long readout distance between the reader and underground SAW sensor was observed. The temperature sensors provided stable performance in terms of underground temperature changes, soil type, and soil compactness at that readout distance. The resultant sensitivity and linearity for the SAW resonator temperature sensor was 0.3 MHz/degrees C and 0.96, respectively. COMSOL and coupling of Mode (COM) modeling were also performed to find the optimal sensor system parameters and predict the results in advance. (C) 2019 Elsevier B.V. All rights reserved.

引用

页数：10

共 24 条

[1]

Agbinya J. I., 2010, J BATTLEFIELD TECH, V13, P21

[2] Wireless Underground Sensor Networks: Channel Modeling and Operation Analysis in the Terahertz Band [J].