Fiber Optic Sensor Embedment Study for Multi-Parameter Strain Sensing

被引：34

作者：

Drissi-Habti, Monssef ^{[1
,4
]}

Raman, Venkadesh ^{[2
]}

Khadour, Aghiad ^{[3
]}

Timorian, Safiullah ^{[1
]}

机构：

[1] PRES LUNAM IFSTTAR, CS4 Route Bouaye, F-44344 Bouguenais, France

[2] Inst Rech Technol IRT Jules VERNE, Chemin Chaffault, F-44340 Bouguenais, France

[3] Univ Paris Est, Components & Syst Dept, IFSTTAR, F-77420 Champs Sur Marne, France

[4] Consortium Durabil Intelligent Composite Mat GIS, Champs Sur Marne, France

来源：

SENSORS | 2017年 / 17卷 / 04期

关键词：

structural health monitoring (SHM); fiber optic sensors; composite material; bonding; numerical simulation; finite element analysis; distributed sensors; multi-axial; multi-parameter strain; PHOTONIC CRYSTAL FIBER; RESIN POCKET GEOMETRY; COMPOSITE; PREDICTION; BEHAVIOR;

D O I：

10.3390/s17040667

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

The fiber optic sensors (FOSs) are commonly used for large-scale structure monitoring systems for their small size, noise free and low electrical risk characteristics. Embedded fiber optic sensors (FOSs) lead to micro-damage in composite structures. This damage generation threshold is based on the coating material of the FOSs and their diameter. In addition, embedded FOSs are aligned parallel to reinforcement fibers to avoid micro-damage creation. This linear positioning of distributed FOS fails to provide all strain parameters. We suggest novel sinusoidal sensor positioning to overcome this issue. This method tends to provide multi-parameter strains in a large surface area. The effectiveness of sinusoidal FOS positioning over linear FOS positioning is studied under both numerical and experimental methods. This study proves the advantages of the sinusoidal positioning method for FOS in composite material's bonding.

引用

页数：16

共 29 条

[1]

[Anonymous], 2015, THESIS

[2] Structural health monitoring with fiber optic sensors [J].

Ansari F. .

Frontiers of Mechanical Engineering in China, 2009, 4 (2) :103-110

[3] Characterization of the response of fibre Bragg grating sensors subjected to a two-dimensional strain field [J].

Bosia, F ;

Giaccari, P ;

Botsis, J ;

Facchini, M ;

Limberger, HG ;

Salathé, RP .

SMART MATERIALS & STRUCTURES, 2003, 12 (06) :925-934

[4]

Castellucci M., 2013, P 2013 SMART STRUCT

[5]

Dasgupta A., 1992, Smart Materials and Structures, V1, P101, DOI 10.1088/0964-1726/1/2/001

[6] IMPORTANCE OF COATINGS TO OPTICAL FIBER SENSORS EMBEDDED IN SMART STRUCTURES [J].

DASGUPTA, A ;

SIRKIS, JS .

AIAA JOURNAL, 1992, 30 (05) :1337-1343

[7]

De Waele W., 2002, THESIS

[8]

Eric U., 2007, SPIE P, V6770

[9]

Glisic B., 2008, FIBRE OPTIC METHODS, P276

[10] Optimization of fibre coating properties for fiber optic smart structures [J].

Hadjiprocopiou, M ;

Reed, GT ;

Hollaway, L ;

Thorne, AM .

SMART MATERIALS & STRUCTURES, 1996, 5 (04) :441-448

← 1 2 3 →