Three-Layer Al/Al-B4C Composite Material Prepared by Casting and Hot Rolling

被引:2
作者
Yu, Yingshui [1 ,2 ]
Jie, Jinchuan [1 ,2 ]
Zhang, Shuang [1 ,2 ]
Tu, Jinghan [1 ,2 ]
Li, Tingju [1 ,2 ]
机构
[1] Dalian Univ Technol, Lab Special Proc Raw Mat, Dalian, Peoples R China
[2] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Peoples R China
基金
中国博士后科学基金; 中国国家自然科学基金;
关键词
three-layer composite; Al; B4C; hot rolling; clad ratio; BORON-CARBIDE;
D O I
10.1007/s11106-015-9727-2
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Casting and hot rolling are proposed to verify a semi-continuous casting and hot rolling process to produce a three-layer Al/Al-B (4) C metal-cermet composite. The outer layer is pure Al, the inner layer is Al matrix composite reinforced with B (4) C particles (the mass fraction of Al and B (4) C are 62.36 and 37.64%, respectively). The results show that the reinforced particles are distributed in the inner layer homogeneously, and both layers are sintered together with no pores or flaws. The clad ratios of the composites of 26, 5, 3, and 1 mm are 50.28, 54.67, 61.23, and 57.46%, respectively. The Vickers hardness varies from 46 HV for the outer pure aluminum layer to 158 HV for the inner composite layer in 3 mm specimen, indicating totally different properties in different layers.
引用
收藏
页码:390 / 396
页数:7
相关论文
共 50 条
[41]   Effect of Sintering Temperature and Hot Cross-Rolling Process on Physical, Mechanical and Microstructural Properties of Al/B4C Composite Made by the Hot Pressing Process [J].
Sahebazamani, Mohammad ;
Ghayebloo, Masomeh ;
Rad, Hamzeh Forati ;
Sarraf-Mamoory, Rasoul .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (11) :4091-4099
[42]   Investigation of Al-B4C Metal Matrix Composites Produced by Friction Stir Additive Processing [J].
Zubcak, Martin ;
Soltes, Jaroslav ;
Zimina, Mariia ;
Weinberger, Thomas ;
Enzinger, Norbert .
METALS, 2021, 11 (12)
[43]   Application of Al-B4C metal matrix composites in the nuclear industry for neutron absorber materials [J].
Chen, X. -G. .
Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium, 2006, :343-350
[44]   Wear and Mechanical Properties of B4C/Al6061 Composites Fabricated by Stir Casting and Rolling Process [J].
Lee, Donghyun ;
Oh, Kanghun ;
Kim, Junghwan ;
Kim, Yangdo ;
Lee, Sang-Bok ;
Cho, Seungchan .
COMPOSITES RESEARCH, 2020, 33 (05) :241-246
[45]   A viable approach to repair neutron shielding B 4 C/6061 Al composite sheets through cold spray and hot rolling co-treatment [J].
Qiu, Xiang ;
Qi, Lu ;
Tang, Jun-rong ;
Tariq, Naeem ul Haq ;
Wang, Ji-qiang ;
Xiong, Tian-ying .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 106 :173-182
[46]   Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake [J].
Sasikumar, C. ;
Kanna, G. Prakash ;
Sundaresan, R. ;
Ramakrishnan, A. .
MATERIALS TODAY-PROCEEDINGS, 2021, 45 :3674-3677
[47]   An Experimental Investigation of Effects of Fluxes (Na3AlF6 and K2TiF6), Element Alloys (Mg), and Composite Powders ((Al + TiC)CP and (Al + B4C)CP) on Distribution of Particles and Phases in Al-B4C and Al-TiC Composites [J].
Mazaheri, Younes ;
Emadi, Rahmatollah ;
Meratian, Mahmood ;
Zarchi, Mehdi Karimi .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2017, 48 (02) :1279-1291
[48]   Effects of Cu Distribution on Solidification Microstructure in Transition Layer of Cu/Al Composite Ingot Prepared by Casting Aluminum Method [J].
Chen, Shuying ;
Chang, Guowei ;
Yue, Xudong ;
Li, Qingchun .
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017, 36 (09) :885-890
[49]   Investigation on addition of B4C particles coated by nano-TiB2 on microstructure and mechanical behavior of Al-B4C composites [J].
Abdizadeh, H. ;
Baharvandi, H. R. ;
Jebelli, F. B. ;
Ehsani, N. .
INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, PTS 1-3, 2007, 6423
[50]   Influence of high B4C contents on structural evolution of Al-B4C nanocomposite powders produced by high energy ball milling [J].
Guo, Hao ;
Zhao, Yu ;
Xu, Songsong ;
Li, Junpeng ;
Liu, Naimeng ;
Zhang, Yang ;
Zhang, Zhongwu .
CERAMICS INTERNATIONAL, 2019, 45 (05) :5436-5447