Is Optical Coherence Tomography a Potential Tool to Evaluate Marginal Adaptation of Class III/IV Composite Restorations In Vivo?

Objective: Margin analysis of Class III and IV composite restorations in vitro and in vivo occurred by scanning electron microscopy (SEM) and optical coherence tomography (OCT). The results were compared and related to clinical evaluation. Methods and Materials: Eight Class III composite restorations were imaged in vitro using OCT and SEM. The margins were analyzed quantitatively. OCT signals were verified by assignment to the criteria perfect margin, gap, and positive/negative ledge. In vivo quantitative margin analysis of Class III/IV composite restorations made of the micro-hybrid composite Venus combined with the self-etch adhesive iBond Gluma inside (1-SE) or etchand-rinse adhesive Gluma Comfort Bond (2-ER) (all Heraeus Kulzer) was carried out using OCT and SEM after 90 months of clinical function. The results were compared with clinical evaluation (US Public Health Service criteria; marginal integrity, marginal discoloration). Results: In vitro, the correlation between OCT and SEM was high for all four margin criteria (Kendall tau b [tau(b)] correlation: 0.64-0.92, p(i)<= 0.026), with no significant differences between OCT and SEM (p(i)>= 0.63). In vivo, a moderate correlation was observed (tau(b): 0.38-0.45, p(i)<0.016). Clinically, the cumulative failure rate in the criterion marginal integrity was higher for the 1-SE group (baseline 90 M, p=0.011). Similarly, OCT and SEM detected higher percentages of the criterion gap in the 1-SE group (p: 0.027/0.002), in contrast to perfect margin. Both, gap and perfect margin ranged widely between 0.0% and 88.7% (OCT) and between 0.0% and 89.0% (SEM). Conclusion: Despite the positive selection bias after 90 months with only a few patients left, quantitative margin analysis allows for differentiation between the two adhesives at this specific date. OCT in particular offers the possibility to evaluate marginal integrity directly in vivo.