Densification of plasma-sprayed titanium and tantalum coatings

被引：27

作者：

Kinos, T ^{[1
]}

Chen, SL ^{[1
]}

Siitonen, P ^{[1
]}

Kettunen, P ^{[1
]}

机构：

[1] TAMPERE UNIV TECHNOL,INST MAT SCI,FIN-33101 TAMPERE,FINLAND

来源：

JOURNAL OF THERMAL SPRAY TECHNOLOGY | 1996年 / 5卷 / 04期

关键词：

corrosion-resistant coatings; electrochemistry; shrouded spraying; titanium and tantalum feedstocks;

D O I：

10.1007/BF02645274

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Thermal spraying of corrosion-resistant coatings of titanium and tantalum is difficult; dense coatings are not produced, and oxidation of these metals increases coating porosity, In this study, oxidation during plasma spraying was reduced with a shrouding system, Porosity and oxide content also were minimized by optimizing the spraying parameters. After optimization, the coatings still had open porosity and thus were incapable of protecting the substrate material against corrosion in water solutions containing 3% NaCl. Therefore, posttreatments for improvement of corrosion resistance were studied, Electron beam fusion produced corrosion resistance equal to or better than that of bulk commercial samples of titanium and tantalum.

引用

页码：439 / 444

页数：6

共 4 条

[1]

CHEN SL, 1993, PLASMA SPRAYING THEO, P95

[2]

GRUNER H, 1984, P UK CORR 1984 I COR, V1, P29

[3] VACUUM PLASMA SPRAYING OF TANTALUM AND NIOBIUM [J].

LUGSCHEIDER, E ;

ESCHNAUER, H ;

HAUSER, B ;

JAGER, D .

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1985, 3 (06) :2469-2474

[4] A COMPARISON OF LOW-PRESSURE ARC AND LOW-PRESSURE PLASMA SPRAYED TITANIUM COATINGS [J].

STEFFENS, HD ;

ERTURK, E ;

BUSSE, KH .

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1985, 3 (06) :2459-2463

← 1 →