Effect of friction stir processed microstructure on tensile properties of an Al-Zn-Mg-Sc alloy upon subsequent aging heat treatment

被引：40

作者：

Charit, Indrajit ^{[1
]}

Mishra, Rajiv S. ^{[2
]}

机构：

[1] Univ Idaho, Dept Chem & Mat Engn, Moscow, ID 83844 USA

[2] Univ North Texas, Dept Mat Sci & Engn, Denton, TX 76203 USA

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2018年 / 34卷 / 01期

关键词：

Friction stir processing; Microstructure; Tensile properties; Heat treatment; ALUMINUM-ALLOYS; WELDED-JOINTS; MECHANICAL-PROPERTIES; STRENGTH;

D O I：

10.1016/j.jmst.2017.10.021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An as-cast Al-Zn-Mg-Sc alloy was friction stir processed varying tool related parameters, yielding microstructures with different grain sizes (0.68, 1.8 and 5.5 mu m). Significant increases in room temperature ductility were obtained in these materials with reasonable enhancement in strength. It is demonstrated that the type of microstructure produced by friction stir processing (FSP) has a significant influence on the choice of post-FSP heat treatment design for achieving improved tensile properties. It is also found that the ultrafine grained FSP material could not achieve the desired high strength during the post-FSP heat treatment without grain coarsening, whereas the micro-grained FSP materials could reach such strength levels (> 560 MPa) under conventional age hardening heat treatment conditions. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

引用

页码：214 / 218

页数：5

共 19 条

[1] Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment [J].

Attallah, MM ;

Salem, HG .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2) :51-59

[2] The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints [J].

Aydin, Hakan ;

Bayram, Ali ;

Durgun, Ismail .

MATERIALS & DESIGN, 2010, 31 (05) :2568-2577

[3] Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy [J].

Charit, I ;

Mishra, RS .

ACTA MATERIALIA, 2005, 53 (15) :4211-4223

[4]

Charit I, 2004, ULTRAFINE GRAINED MATERIALS III, P95

[5] Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 [J].

Chen, Y. ;

Ding, H. ;

Li, J. Z. .

PROCEEDINGS OF THE 3RD PAN AMERICAN MATERIALS CONGRESS, 2017, :681-687

[6]

Davis J. R., 2010, METALS HDB DESK EDIT, P1034

[7]

DEIASI R, 1977, METALL TRANS A, V8, P1177

[8] Friction stir processing of 7075 Al alloy and subsequent aging treatment [J].

Gholami, Siavash ;

Emadoddin, Esmaeil ;

Tajally, Mohammad ;

Borhani, Ehsan .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (09) :2847-2855

[9] Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys [J].

Jata, KV ;

Semiatin, SL .

SCRIPTA MATERIALIA, 2000, 43 (08) :743-749

[10] The effect of post weld heat treatment on the properties of 6061 friction stir welded joints [J].

Krishnan, KN .

JOURNAL OF MATERIALS SCIENCE, 2002, 37 (03) :473-480

← 1 2 →