Effect of magnetic field on tribological properties of IN718 superalloy coating produced by laser cladding on GTD-111 superalloy

被引：22
作者：
Zuo, Zhaoyang [1 ]
Taheri, Morteza [2 ,3 ]
Razavi, Mansour [3 ]
Torkamany, Mohammad Javad [4 ]
Rasoulpouraghdam, Arash [5 ]
Vignesh, R. Vaira [6 ]
机构：
[1] Xijing Univ, Sch Mech Engn, Xian, Shaanxi, Peoples R China
[2] Islamic Azad Univ, South Tehran Branch, Dept Mat Engn, Tehran, Iran
[3] Mat & Energy Res Ctr, Dept Ceram, Karaj 31787316, Iran
[4] Iranian Natl Ctr Laser Sci & Technol, Tehran, Iran
[5] Univ West, Dept Engn Sci, S-46186 Trollhattan, Sweden
[6] Amrita Vishwa Vidyapeetham, Amrita Sch Engn, Dept Mech Engn, Coimbatore, India
来源：
VACUUM | 2022年 / 203卷
关键词：
Elastic properties; Wear and tribology; Laser processing; Microstructure; MECHANICAL-PROPERTIES; MICROSTRUCTURE;
D O I：
10.1016/j.vacuum.2022.111311
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study was to investigate the effect of a magnetic field on the wear behavior of an IN718 layer applied by laser cladding on GTD-111 superalloy. The results showed that by increasing the intensity of the magnetic induction field from 25 mT to 75 mT, the grains become finer and the area of the equiaxed grains increases. This increased the hardness and decreased the porosity of the cladding zone (CZ). However, the greatest magnetostrictive effect was produced at a magnetic intensity of 25 mT, which reduced the elastic modulus of the specimen. Under such conditions, the hardness ratio to the elastic modulus reached its maximum value (3.97), which resulted in increased wear resistance of the CZ.
引用
收藏
页数：5
相关论文
共 13 条
[1]   Evolution of solidification and microstructure in laser-clad IN625 superalloy powder on GTD-111 superalloy [J].
Cao, Yan ;
Farouk, Naeim ;
Taheri, Morteza ;
Yumashev, Alexei Valerievich ;
Bozorg, Seyed Farshid Kashani ;
Ojo, Olatunji Oladimeji .
SURFACE & COATINGS TECHNOLOGY, 2021, 412
[2]   Investigation of creep behavior of Ni3Al-base superalloy by small punch creep [J].
Cao, Yan ;
Mohamed, Abdeliazim Mustafa ;
Moshtaghi, Samira ;
Taheri, Morteza ;
Torkamany, Mohammad Javad .
VACUUM, 2021, 187
[3]   Lightweight refractory high entropy alloy coating by laser cladding on Ti-6Al-4V surface [J].
Chen, Lin ;
Wang, Yueyi ;
Hao, Xuanhong ;
Zhang, Xiaowei ;
Liu, Hongxi .
VACUUM, 2021, 183
[4]   Microstructural evolution of laser clad Stellite 31 powder on Inconel 713 LC superalloy [J].
Khorram, Ali .
SURFACE & COATINGS TECHNOLOGY, 2021, 423 (423)
[5]  
Kulka M., 2019, Current Trends in Boriding Techniques
[6]   Effect of Heat Treatment Combined with an Alternating Magnetic Field on Microstructure and Mechanical Properties of a Ni-Based Superalloy [J].
Li, Chuanjun ;
Seyring, Martin ;
Li, Xi ;
Zhong, Yunbo ;
Ren, Zhongming ;
Rettenmayr, Markus .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (04) :1837-1850
[7]   Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB) [J].
Paidar, Moslem ;
Ojo, Olatunji Oladimeji ;
Ezatpour, Hamid Reza ;
Heidarzadeh, Akbar .
SURFACE & COATINGS TECHNOLOGY, 2019, 361 :159-169
[8]   Wear behavior of self-lubricating boride layers produced on Inconel 600-alloy by laser alloying [J].
Piasecki, Adam ;
Kotkowiak, Mateusz ;
Makuch, Natalia ;
Kulka, Michal .
WEAR, 2019, 426 :919-933
[9]   Features of hybrid laser-arc welding of GTD-111 superalloy compared to laser beam welding [J].
Taheri, Morteza ;
Kazemi, Amirreza ;
Gurusamy, P. ;
Rasoulpouraghdam, Arash ;
Mohanavel, V ;
Ravichandran, M. ;
Paidar, Moslem .
MATERIALS LETTERS, 2022, 309
[10]   Relationship between solidification and liquation cracks in the joining of GTD-111 nickel-based superalloy by Nd:YAG pulsed-laser welding [J].
Taheri, Morteza ;
Razavi, Mansour ;
Kashani-Bozorg, Seyed Farshid ;
Torkamany, Mohammad Javad .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 :5635-5649
12