Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part II. Effect of Mold Oscillation on Heat Transfer Behaviors

被引:14
作者
Ma, Fanjun [1 ]
Liu, Yongzhen [1 ]
Wang, Wanlin [1 ]
Zhang, Haihui [1 ]
机构
[1] Cent S Univ, Sch Met & Environm, Changsha 410083, Hunan, Peoples R China
来源
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2015年 / 46卷 / 04期
关键词
INITIAL SOLIDIFICATION; CRYSTALLIZATION; FILM; STEEL; LAYERS; SLAG; OXIDES;
D O I
10.1007/s11663-015-0367-1
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Mold flux solidification and heat transfer experiments under both non-oscillation and oscillation modes have been conducted and compared with the help of Mold Flux Heat Transfer Simulator (MFHTS) technique. The results suggested that the steady-state responding heat flux in the mode of oscillation is smaller than that in non-oscillation operation, and a transition time is observed in the responding temperature and heat flux profiles during the oscillation experiments. The oscillation of mold would introduce the roughness of slag film surface and the enlargement of air gap at the interface of mold/flux film; thus, the interfacial thermal resistance was enhanced. In addition, the thermal conductivity of solid crystalline mold flux and mold/flux film interfacial thermal resistance at steady state were calculated in this work. The thermal conductivity of crystalline mold flux was about 1.43 to 1.76 W m(-1) K-1, and the interfacial thermal resistance R-int in oscillation operation was calculated as 17.3 to 22.5 9 10(-4) m(2) (K W-1) in the measured region. The obtained interfacial thermal resistance R-int in this work is higher than that in non-oscillation operations. (C) The Minerals, Metals & Materials Society and ASM International 2015
引用
收藏
页码:1902 / 1911
页数:10
相关论文
共 50 条
  • [21] Use of improved cold-finger technique to assess effects of basicity on heat transfer through solidified mold flux
    Assis, Karina Lara Santos
    Pistorius, Petrus Christiaan
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2019, 26 (04) : 393 - 402
  • [22] Effect of Titania Absorption into a Mold Flux on the Heat Transfer Between the Mold and the Slab in the Continuous Casting of Titanium-Stabilized Stainless Steel
    Hao, Zhanquan
    Chen, Weiqing
    Lippold, Carsten
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2010, 41 (04): : 805 - 812
  • [23] Effects of Mold Powder Chemistry on Shell Growth, Momentum and Heat Transfer in a Billet Mold
    Najera-Bastida, A.
    Morales, R. D.
    Garcia-Demedices, L.
    Zarate-Gutierrez, R.
    Rodriguez-Avila, J.
    [J]. STEEL RESEARCH INTERNATIONAL, 2011, 82 (04) : 301 - 312
  • [24] Heat transfer control by dispersed metallic particles in glassy mold flux film for continuous steel casting
    Hyun, Sung-Hee
    Cho, Jung-Wook
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2020, 103 (10) : 5678 - 5687
  • [25] Initial Solidification and Its Related Heat Transfer Phenomena in the Continuous Casting Mold
    Wang, Wanlin
    Zhu, Chenyang
    Zhou, Lejun
    [J]. STEEL RESEARCH INTERNATIONAL, 2017, 88 (10)
  • [26] A coupled model on fluid flow, heat transfer and solidification in continuous casting mold
    Zhang, Xu-bin
    Chen, Wei
    Zhang, Li-feng
    [J]. CHINA FOUNDRY, 2017, 14 (05) : 416 - 420
  • [27] Heat-Transfer Behavior of Mold Fluxes for Continuous Casting of Invar Alloy
    Yan, Wei
    Chen, Weiqing
    Lippold, Carsten
    Xu, Hongcheng
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (06): : 1466 - 1477
  • [28] In-Situ Quantitative Study of Heat Transfer Performance of Mold Flux by Using Double Hot Thermocouple Technology
    Wang, Zhe
    Wen, Guanghua
    Jiang, Wenbo
    Tang, Ping
    Huang, Shuheng
    [J]. TMS 2021 150TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2021, : 331 - 337
  • [29] A Study of the Heat Transfer Behavior of Mold Fluxes with Different Amounts of Al2O3
    Zhou, Lejun
    Wang, Wanlin
    Zhou, Kechao
    [J]. METALS, 2016, 6 (06)
  • [30] Simulation Study on Transient Periodic Heat Transfer Behavior of Meniscus in Continuous Casting Mold
    Wei, Zi-Jian
    Wang, Xu-Dong
    Yao, Man
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2023, 54 (06): : 3164 - 3179