Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components

被引：79
作者：
Lambarri, Jon [1 ]
Leunda, Josu [1 ]
Garcia Navas, Virginia [1 ]
Soriano, Carlos [1 ]
Sanz, Carmen [1 ]
机构：
[1] IK4 Tekniker, Adv Mfg Technol Unit, Eibar 20600, Gipuzkoa, Spain
来源：
OPTICS AND LASERS IN ENGINEERING | 2013年 / 51卷 / 07期
关键词：
Laser cladding; Heat treatment; Inconel; 718; Microstructure; Mechanical properties;
D O I：
10.1016/j.optlaseng.2013.01.011
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
The suitability of the laser cladding technique for manufacturing and repairing aeronautic components of Inconel 718 was evaluated. Multilayer coatings were deposited on Inconel 718 plates, using a continuous wave Nd:YAG laser. The microstructure of the laser cladding samples was investigated using optical and scanning electron microscopy and microhardness profiles were measured after different heat treatment stages. Finally, tensile tests were carried out on fully aged samples extracted from a massive multilayer coating. It was proven that the resulting coatings satisfy the industrial requirements for aeronautic applications, with mechanical properties well above the minimum specified values and with no detrimental phases or precipitates left after the heat treatment. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：813 / 821
页数：9
相关论文
共 50 条
  • [41] Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties
    Marques, Ana
    Cunha, Angela
    Silva, Mariana Rodrigues
    Osendi, Maria Isabel
    Silva, Filipe Samuel
    Carvalho, Oscar
    Bartolomeu, Flavio
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (9-10) : 5651 - 5675
  • [42] Microstructural characteristics of forged and heat treated Inconel-718 disks
    Chamanfar, A.
    Sarrat, L.
    Jahazi, M.
    Asadi, M.
    Weck, A.
    Koul, A. K.
    [J]. MATERIALS & DESIGN, 2013, 52 : 791 - 800
  • [43] Cooling rate effect on tensile strength of laser deposited Inconel 718
    Bennett, Jennifer L.
    Kafka, Orion L.
    Liao, Haiguang
    Wolff, Sarah J.
    Yu, Cheng
    Cheng, Puikei
    Hyatt, Gregory
    Ehmann, Kornel
    Cao, Jian
    [J]. 46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 912 - 919
  • [44] Effects of electric current on δ phase evolution and tensile behavior of Inconel 718
    Huang, Jiankang
    Li, Qi
    Yang, Fuqian
    Yu, Xiaoquan
    Ni, Yu
    Fan, Ding
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 855
  • [45] Direct metal laser sintered (DMLS) process to develop Inconel 718 alloy for turbine engine components
    Raj, B. Anush
    Jappes, J. T. Winowlin
    Khan, M. Adam
    Dillibabu, V
    Brintha, N. C.
    [J]. OPTIK, 2020, 202
  • [46] Wear Behavior of Laser Surface Melted Inconel 718
    Sharma, S. K.
    Biswas, K.
    Nath, A. K.
    Manna, I
    Majumdar, J. Dutta
    [J]. LASERS IN ENGINEERING, 2021, 50 (1-3) : 1 - 13
  • [47] Characterization of Subsurface Microstructural Alterations Induced by Hard Turning of Inconel 718
    Touazine, Heithem
    Chadha, Kanwal
    Jahazi, Mohammad
    Bocher, Philippe
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) : 7016 - 7024
  • [48] Performance Characterization of Laser Powder Bed Fusion Fabricated Inconel 718 Treated with Experimental Hot Isostatic Processing Cycles
    Varela, Jaime
    Merino, Jorge
    Pickett, Christina
    Abu-Issa, Ahmad
    Arrieta, Edel
    Murr, Lawrence E.
    Wicker, Ryan B.
    Ahlfors, Magnus
    Godfrey, Donald
    Medina, Francisco
    [J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2020, 4 (03):
  • [49] Electron beam welding of rolled and laser powder bed fused Inconel 718
    Sali, Akash
    Patel, Vivek
    Hyder, James
    Hyder, David
    Corliss, Mike
    Hung, Wayne
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8) : 5451 - 5468
  • [50] Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting
    Calandri, Michele
    Yin, Shuo
    Aldwell, Barry
    Calignano, Flaviana
    Lupoi, Rocco
    Ugues, Daniele
    [J]. MATERIALS, 2019, 12 (08)
12345