Influence of thermomechanical processing sequence on properties of AA6082-IF steel cold roll bonded composite sheet

被引：8
作者：
Arbo, Siri Marthe [1 ]
Bergh, Tina [2 ]
Solhaug, Harald [1 ]
Westermann, Ida [1 ]
Holmedal, Bjorn [1 ]
机构：
[1] Norwegian Univ Sci & Technol, Dept Mat Sci & Engn, Alfred Getz Vei 2, NO-7491 Trondheim, Norway
[2] Norwegian Univ Sci & Technol, Dept Phys, Hoyskoleringen 5, NO-7491 Trondheim, Norway
来源：
PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018 | 2018年 / 15卷
关键词：
Cold roll bonding; Steel-aluminum joints; Thermomechanical processing; Bond strength; Intermetallic phases; MECHANICAL-PROPERTIES; ALUMINUM; LAYER; MICROSTRUCTURE; STRENGTH; QUALITY; STRIPS;
D O I：
10.1016/j.promfg.2018.07.189
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Cold roll bonded tri-layered composites consisting of AA6082 and IF steel have been produced. The goal was to find the optimal sequence of solutionizing, aging and rolling, for obtaining good bond strength and at the same time, a precipitation hardened aluminum structure. The influence of rolling temperature was also investigated. Results show that the sequence of the thermomechanical process influences the interface characteristics and the final bond strength. The different thermomechanical sequences did not have any negative effects on the aluminums aging potential. (C) 2018 The Authors. Published by Elsevier B.V.
引用
收藏
页码：152 / 160
页数：9
相关论文
共 25 条
  • [1] Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties
    Akramifard, H. R.
    Mirzadeh, H.
    Parsa, M. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 613 : 232 - 239
  • [2] [Anonymous], 2015, AL AUT MAN JOIN
  • [3] Welding of Aluminum Alloys to Steels: An Overview
    Atabaki, M. Mazar
    Nikodinovski, M.
    Chenier, P.
    Ma, J.
    Harooni, M.
    Kovacevic, R.
    [J]. JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2014, 14 (02) : 59 - 78
  • [4] Bay N., 1979, J ENG IND, V101
  • [5] Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy
    Borrisutthekul, Rattana
    Yachi, Taisei
    Miyashita, Yukio
    Mutoh, Yoshiharu
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 467 (1-2): : 108 - 113
  • [6] Investigation of different parameters on roll bonding quality of aluminium and steel sheets
    Buchner, M.
    Buchner, B.
    Buchmayr, B.
    Kilian, H.
    Riemelmoser, F.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 1279 - 1282
  • [7] CRYSTAL STRUCTURE OF TERNARY ALLOY ALPHA(ALFESI)
    COOPER, M
    [J]. ACTA CRYSTALLOGRAPHICA, 1967, 23 : 1106 - &
  • [8] Investigation of roll bonding between aluminum alloy strips
    Eizadjou, M.
    Manesh, H. Danesh
    Janghorban, K.
    [J]. MATERIALS & DESIGN, 2008, 29 (04) : 909 - 913
  • [9] The effect of surface preparation on the bond strength of Al-St strips in CRB process
    Gao, Chuang
    Li, Long
    Chen, Xin
    Zhou, Dejing
    Tang, Chaolan
    [J]. MATERIALS & DESIGN, 2016, 107 : 205 - 211
  • [10] ANALYSIS OF SANDWICH SHEET ROLLING BY STREAM FUNCTION-METHOD
    HWANG, YM
    HSU, HH
    LEE, HJ
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1995, 37 (03) : 297 - 315
123