Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature

被引:51
|
作者
Constantin, G. [1 ]
Rossignol, C. [1 ]
Briois, P. [2 ]
Billard, A. [2 ]
Dessemond, L. [1 ]
Djurado, E. [1 ]
机构
[1] Univ Grenoble 1, Univ Savoie, CNRS Grenoble INP, LEPMI,UMR 5279, F-38402 St Martin Dheres, France
[2] UTBM, IRTES LERMPS EA 7274, F-90010 Belfort, France
关键词
Buffer layer; LSCF; CGO; YSZ; Ageing; Impedance spectroscopy; ELECTROSTATIC SPRAY DEPOSITION; YTTRIA-STABILIZED ZIRCONIA; ELECTROCHEMICAL CHARACTERIZATION; IMPEDANCE SPECTROSCOPY; REFERENCE ELECTRODE; EXPERIMENTAL LIMITATIONS; CATHODE MATERIALS; MODEL ELECTRODES; OXYGEN REDUCTION; SOFC CATHODES;
D O I
10.1016/j.ssi.2013.07.004
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An ageing investigation of LSCF/CGO/YSZ half-cell, at 700 degrees C in air at OCP, was performed for different CGO buffer layer thicknesses (0, 0.11, 0.45, 1.1 and 2 mu m), using impedance spectroscopy (IS). The ageing behavior of the half-cell has been found to be strongly dependent on the CGO thickness. With addition of the CGO buffer layer the initial apparent electrolyte resistance was significantly reduced, while the LSCF cathodes showed limited performance degradation over a period of 530 h. X-ray microanalyses have shown that the recorded degradation of the LSCF cathode without buffer layer is due to the diffusion and the segregation of Sr at the LSCF/YSZ interface. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:98 / 104
页数:7
相关论文
共 50 条
  • [31] Intermediate temperature solid oxide fuel cell/electrolyzer towards future large-scale production
    Fragiacomo, P.
    De Lorenzo, G.
    Corigliano, O.
    INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND SMART MANUFACTURING (ISM 2019), 2020, 42 : 259 - 266
  • [32] Thermal expansion and elastic moduli of electrolyte materials for high and intermediate temperature solid oxide fuel cell
    Gao, Peipei
    Bolon, Amy
    Taneja, Manisha
    Xie, Zhilin
    Orlovskaya, Nina
    Radovic, Miladin
    SOLID STATE IONICS, 2017, 300 : 1 - 9
  • [33] Sr-doped Sm2CuO4 cathode for intermediate temperature solid oxide fuel cells
    Chaudhari, V. N.
    Khandale, A. P.
    Bhoga, S. S.
    SOLID STATE IONICS, 2014, 268 : 140 - 149
  • [34] Development of lanthanum-doped praseodymium cuprates as cathode materials for intermediate-temperature solid oxide fuel cells
    Lyskov, N. V.
    Kolchina, L. M.
    Galin, M. Z.
    Mazo, G. N.
    SOLID STATE IONICS, 2018, 319 : 156 - 161
  • [35] Double Perovskite Material as An Electrode for Intermediate-Temperature Solid Oxide Fuel Cells Application
    Zhang Wenrui
    Zhang Zhihui
    Gao Liguo
    Ma Tingli
    PROGRESS IN CHEMISTRY, 2016, 28 (06) : 961 - 974
  • [36] Interface engineering to improve electrochemical performance of intermediate-temperature solid oxide fuel cells
    Yoo, Hyun Sik
    Kim, Seo Ju
    Megra, Yonas Tsegaye
    Lee, Jongseo
    Suk, Ji Won
    Lee, Wonyoung
    APPLIED SURFACE SCIENCE, 2023, 639
  • [37] Electrochemical Characterization of Thin Films for a Micro-Solid Oxide Fuel Cell
    J. L. Hertz
    H. L. Tuller
    Journal of Electroceramics, 2004, 13 : 663 - 668
  • [38] Electrochemical characterization of thin films for a micro-solid oxide fuel cell
    Hertz, JL
    Tuller, HL
    JOURNAL OF ELECTROCERAMICS, 2004, 13 (1-3) : 663 - 668
  • [39] Cobalt-free polycrystalline Ba0.95La0.05FeO3-δ thin films as cathodes for intermediate-temperature solid oxide fuel cells
    Chen, Dengjie
    Chen, Chi
    Dong, Feifei
    Shao, Zongping
    Ciucci, Francesco
    JOURNAL OF POWER SOURCES, 2014, 250 : 188 - 195
  • [40] Electrical properties of Cu-Mn-Zrco-doped ceria electrolytes for intermediate temperature solid oxide fuel cell application
    Zagaynov, Igor, V
    Fedorov, Sergey, V
    Goldberg, Margarita A.
    PROCESSING AND APPLICATION OF CERAMICS, 2019, 13 (03) : 244 - 249