Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature

被引:51
|
作者
Constantin, G. [1 ]
Rossignol, C. [1 ]
Briois, P. [2 ]
Billard, A. [2 ]
Dessemond, L. [1 ]
Djurado, E. [1 ]
机构
[1] Univ Grenoble 1, Univ Savoie, CNRS Grenoble INP, LEPMI,UMR 5279, F-38402 St Martin Dheres, France
[2] UTBM, IRTES LERMPS EA 7274, F-90010 Belfort, France
关键词
Buffer layer; LSCF; CGO; YSZ; Ageing; Impedance spectroscopy; ELECTROSTATIC SPRAY DEPOSITION; YTTRIA-STABILIZED ZIRCONIA; ELECTROCHEMICAL CHARACTERIZATION; IMPEDANCE SPECTROSCOPY; REFERENCE ELECTRODE; EXPERIMENTAL LIMITATIONS; CATHODE MATERIALS; MODEL ELECTRODES; OXYGEN REDUCTION; SOFC CATHODES;
D O I
10.1016/j.ssi.2013.07.004
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An ageing investigation of LSCF/CGO/YSZ half-cell, at 700 degrees C in air at OCP, was performed for different CGO buffer layer thicknesses (0, 0.11, 0.45, 1.1 and 2 mu m), using impedance spectroscopy (IS). The ageing behavior of the half-cell has been found to be strongly dependent on the CGO thickness. With addition of the CGO buffer layer the initial apparent electrolyte resistance was significantly reduced, while the LSCF cathodes showed limited performance degradation over a period of 530 h. X-ray microanalyses have shown that the recorded degradation of the LSCF cathode without buffer layer is due to the diffusion and the segregation of Sr at the LSCF/YSZ interface. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:98 / 104
页数:7
相关论文
共 50 条
  • [1] Interface stability of thin, dense CGO film coating on YSZ for solid oxide fuel cells
    Constantin, G.
    Rossignol, C.
    Barnes, J. -P.
    Djurado, E.
    SOLID STATE IONICS, 2013, 235 : 36 - 41
  • [2] CGO as a barrier layer between LSCF electrodes and YSZ electrolyte fabricated by spray pyrolysis for solid oxide fuel cells
    Szymczewska, D.
    Karczewski, J.
    Chrzan, A.
    Jasinski, P.
    SOLID STATE IONICS, 2017, 302 : 113 - 117
  • [3] Performance of (La,Sr)(Co,Fe)O3-x double-layer cathode films for intermediate temperature solid oxide fuel cell
    Marinha, D.
    Hayd, J.
    Dessemond, L.
    Ivers-Tiffee, E.
    Djurado, E.
    JOURNAL OF POWER SOURCES, 2011, 196 (11) : 5084 - 5090
  • [4] Ethanol internal steam reforming in intermediate temperature solid oxide fuel cell
    Diethelm, Stefan
    Van herle, Jan
    JOURNAL OF POWER SOURCES, 2011, 196 (17) : 7355 - 7362
  • [5] Synthesis and performance of Sr1.5LaxMnO4 as cathode materials for intermediate temperature solid oxide fuel cell
    Sun Li-Ping
    Li Qiang
    Huo Li-Hua
    Zhao Hui
    Zhang Guo-Ying
    Lin Nan
    Viricelle, Jean-Paul
    Pijolat, Christophe
    JOURNAL OF POWER SOURCES, 2011, 196 (14) : 5835 - 5839
  • [6] Scandia-zirconia electrolytes for intermediate temperature solid oxide fuel cell operation
    Badwal, SPS
    Ciacchi, FT
    Milosevic, D
    SOLID STATE IONICS, 2000, 136 : 91 - 99
  • [7] X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell
    Kim, Yongmin
    Schlegl, Harald
    Kim, Keunsoo
    Irvine, John T. S.
    Kim, Jung Hyun
    APPLIED SURFACE SCIENCE, 2014, 288 : 695 - 701
  • [8] Electrochemical and gas phase parameters of cathodes for intermediate temperature solid oxide fuel cells
    Lust, E.
    Kuengas, R.
    Kivi, I.
    Kurig, H.
    Moeller, P.
    Anderson, E.
    Lust, K.
    Tamm, K.
    Samussenko, A.
    Nurk, G.
    ELECTROCHIMICA ACTA, 2010, 55 (26) : 7669 - 7678
  • [9] Synthesis and electrochemical properties of layered perovskite substituted with heterogeneous lanthanides for intermediate temperature-operating solid oxide fuel cell
    Song, Sun Woong
    Choi, Won Seok
    Kang, Hyunil
    Baek, Seung-Wook
    Azad, Abul K.
    Park, Jun-Young
    Kim, Jung Hyun
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2018, 43 (24) : 11378 - 11385
  • [10] Electrical Properties of Electrosprayed YSZ Thin Films for Intermediate Temperature - Solid Oxide Fuel Cells (IT-SOFC)
    Bailly, N.
    Georges, S.
    Djurado, E.
    IONIC AND MIXED CONDUCTING CERAMICS 8, 2012, 45 (01): : 413 - 420