Preparation and Interface Investigation of Fe/Al2O3P Composite Activated by Ni and Ti

被引：39
作者：
Tang, Shuli [1 ]
Gao, Yimin [1 ]
Li, Yefei [1 ]
Zheng, Qiaoling [1 ]
机构：
[1] Xi An Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Mech Behav Mat, 28 Xianning West Rd, Xian 710049, Shaanxi, Peoples R China
来源：
ADVANCED ENGINEERING MATERIALS | 2016年 / 18卷 / 11期
基金：
中国国家自然科学基金;
关键词：
METAL-MATRIX COMPOSITES; POROUS TI; ALUMINA; INFILTRATION; AL2O3; MICROSTRUCTURE; FABRICATION; BEHAVIOR;
D O I：
10.1002/adem.201600302
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ceramic particles preforms are synthesized by vacuum sintering reaction between Al2O3 particles and active elements Ti and Ni. The surface of preforms sintered by Al2O3 and Ti consists of block-shaped a-Ti and fibrous TiO. As the content of Ti in preforms increases, the compressive strength of preforms rises first and then falls and the porosity decreases gradually. The preforms sintered of Al2O3 and Ni-Ti have much higher compressive strength, because of the compact sintered shell outside Al2O3 and the sintered necks between particles. Then the preforms/high-Cr cast iron composite is fabricated by infiltration casting process. The three-body abrasive wear resistance of composite is over 12 times higher than Cr15, owing to the protection of extruded Al2O3 and tightly bonded composite interface.
引用
收藏
页码：1913 / 1920
页数：8
相关论文
共 47 条
  • [1] [Anonymous], 1996, TEST METH CRUSH STRE
  • [2] ASM International Handbook Committee, 1993, ASM HDB, V1
  • [3] Influence of atmosphere and carbon contamination on activated pressureless infiltration of alumina-steel composites
    Bahraini, M.
    Schlenther, E.
    Kriegesmann, J.
    Graule, T.
    Kuebler, J.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (10) : 1511 - 1515
  • [4] Fabrication and Machining of Metal Matrix Composites: A Review
    Bains, Preetkanwal Singh
    Sidhu, Sarabjeet Singh
    Payal, H. S.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (05) : 553 - 573
  • [5] Barin I., 1993, J MATER SCI TECHNOL, P48
  • [6] Chen L., 2012, PREPARATION WEAR RES
  • [7] International standardization and organizations in the field of tribology
    Dasic, P
    Franek, F
    Assenova, E
    Radovanovic, M
    [J]. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2003, 55 (06) : 287 - 291
  • [8] Brazing Al2O3 to sintered Fe-Ni-Co alloys
    Do Nascimento, RM
    Martinelli, AE
    Buschinelli, AJDA
    Klein, AN
    [J]. JOURNAL OF MATERIALS SCIENCE, 1999, 34 (23) : 5839 - 5845
  • [9] Numerical simulation of mold filling process for high chromium cast iron matrix composite reinforced by ZTA ceramic particles
    Du, Jun
    Chong, XiaoYu
    Jiang, YeHua
    Feng, Jing
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 89 : 872 - 883
  • [10] Edelbauer Johannes, 2015, Materials Science Forum, V825-826, P93, DOI 10.4028/www.scientific.net/MSF.825-826.93
12345