Gelation of whey protein and xanthan mixture: Effect of heating rate on rheological properties

The effects of heating rate and xanthan addition on the gelation of a 15% w/w whey protein solution at pH 7 and in 0.1 M phosphate buffer were studied using small-amplitude oscillatory shear (SAOS) rheological measurements and uniaxial compression tests. WPI solutions were heated from 25 to 90 degrees C at five heating rates (0.1, 1, 5, 10 and 20 degrees C/min). Gelation temperature of WPI decreased with decreasing of heating rates and with xanthan addition. Under uniaxial compression, the WPI gels prepared with no more than 0.2% w/w xanthan exhibited distinct fracture point and were tougher (i.e. higher fracture stress and fracture strain) than the gels prepared with no less than 0.5% w/w xanthan. In general, the fracture strain of WPI gels increased with heating rate, though not significantly, at all xanthan contents investigated. However, the fracture stress of WPI gels, generally, decreased with heating rate when xanthan content was 0-0.2% and increased with heating rate when xanthan content was 0.5 and 1%. (c) 2005 Elsevier Ltd. All rights reserved.