Hydrogen analysis ahead of the fatigue crack tip in the high strength steel

被引:0
作者
Matvienko, Yu. G. [1 ]
机构
[1] Russian Acad Sci, Mech Engn Res Inst, Moscow 101990, Russia
来源
ENGINEERING STRUCTURAL INTEGRITY: RESEARCH, DEVELOPMENT AND APPLICATION, VOLS 1 AND 2 | 2007年
关键词
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The secondary ion mass spectrometry method has been employed to analyse the distribution of hydrogen concentration in the zone of the fatigue crack tip and at its edges in the martensitic high strength steel. Changes in hydrogen concentration were observed in the vicinity of the propagating crack tip and at a remote site. The hydrogen peak is reduced and moves away from the fatigue crack tip with the increase of the maximum stress intensity factor. The physical failure criterion based on the hydrogen peak in the vicinity of the fatigue crack tip and the maximum stress intensity factor has been proposed. The criterion reflects changes in the hydrogen peak which resulted from the hydrogen redistribution due to the increase of the maximum stress intensity factor as the crack length increases under fatigue loading.
引用
收藏
页码:1569 / 1571
页数:3
相关论文
共 4 条
  • [1] ANALYSIS OF CRACK-TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED-MODE LOADS
    GAO, H
    CAO, W
    FANG, C
    DELOSRIOS, ER
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1994, 17 (10) : 1213 - 1220
  • [2] MATVIENKO YG, 2002, P 14 EUR C FRACT FRA
  • [3] Matvienko Yu.G., 1990, PHYSICOCHEM MECH MAT, V26, P9
  • [4] Wu Shiding, 1990, Acta Metallurgica Sinica, V26, pA86