Application of solution-processed metal oxide layers as charge transport layers for CdSe/ZnS quantum-dot LEDs

We fabricated and characterized quantum-dot light emitting devices (QLEDs) that consisted of a CdSe/ZnS quantum-dot (QD) emitting layer, a hole-transporting nickel oxide (NiO) layer and/or an electron-transporting zinc oxide (ZnO) layer. Both the p-type NiO and n-type ZnO layers were formed by using sol-gel processes. All the fabricated CdSe/ZnS QLEDs showed similar electroluminescence spectra that originated from the green CdSe/ZnS QDs. However, different combinations of hole-and electron-transporting layers resulted in efficiency variations. In addition to the control of the respective concentrations of holes and electrons within a multilayer device structure, which determines the luminance and efficiency of QLEDs, the use of metal oxide layers is advantageous for long-term stability of QLEDs because they are air stable and can block the permeation of water vapor and oxygen in ambient air to a QD emitting layer. Moreover, the wet chemistry processing for their formation makes metal oxide layers attractive for low cost and/or large area manufacture of QLEDs.