Keyhole gas tungsten arc welding of AISI 316L stainless steel

被引：128

作者：

Feng, Yueqiao ^{[1
]}

Luo, Zhen ^{[1
,2
]}

Liu, Zuming ^{[1
]}

Li, Yang ^{[1
]}

Luo, Yucan ^{[1
]}

Huang, Yongxian ^{[2
]}

机构：

[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China

[2] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China

来源：

MATERIALS & DESIGN | 2015年 / 85卷

关键词：

Keyhole gas tungsten arc welding; AISI 316L stainless steel; Microstructures; Mechanical properties; Corrosion resistance; HEAT INPUT; GTA; MICROSTRUCTURE; JOINTS; SHAPE;

D O I：

10.1016/j.matdes.2015.07.011

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Keyhole gas tungsten arc welding (K-TIG) was used to weld AISI 316L stainless steel of mid-thickness (thickness ranging 6-13 mm). 316L plates of 10-mm thickness were jointed using an I-groove in a single pass without filler metal. The effects of welding parameters on the fusion zone profile were investigated. The weld properties, including mechanical properties, microstructure, and corrosion resistance, were analyzed. The primary weld microstructures were austenite and delta-ferrite. The tensile strength and impact property of the weld were almost the same as those of the base metal, while the corrosion resistance of the weld was even better than that of the base metal. High-quality 316L stainless steel joints can be realized through K-TIG welding with high productivity and low processing cost. The practical application of K-TIG welding to join mid-thickness workpieces in industry is well demonstrated and an ideal process for welding AISI 316L of mid-thickness with high efficiency and low cost is presented. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：24 / 31

页数：8

共 24 条

[1] The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L [J].

AghaAli, Iman ;

Farzam, Mansour ;

Golozar, Mohammad Ali ;

Danaee, Iman .

MATERIALS & DESIGN, 2014, 54 :331-341

[2]

Bend Test Methods on Welded Joints, 2008, GBT26502008

[3]

Cai Z.X., 2004, WELDING METALLURGY S, P143

[4] Research on the Activating Flux Gas Tungsten Arc Welding and Plasma Arc Welding for Stainless Steel [J].

Huang, Her-Yueh .

METALS AND MATERIALS INTERNATIONAL, 2010, 16 (05) :819-825

[5]

Jarvis B.J., 2001, THESIS, P37

[6]

Jarvis BL, 2000, SCI TECHNOL WELD JOI, V5, P1

[7]

Kamiya O., 1991, Q J JPN WELD SOC, V9, P61

[8] Process Parameter Optimization of AISI 316L(N) Weld Joints Produced using Flux-Cored Arc Welding Process [J].

Katherasan, D. ;

Srivastava, Sameer ;

Sathiya, P. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2013, 66 (02) :123-132

[9] Microstructural, compositional and mechanical investigation of Shielded Metal Arc Welding (SMAW) welded superaustenitic UNS N08028 (Alloy 28) stainless steel [J].

Kchaou, Y. ;

Haddar, N. ;

Henaff, G. ;

Pelosin, V. ;

Elleuch, K. .

MATERIALS & DESIGN, 2014, 63 :278-285

[10] Keyhole gas tungsten arc welding of commercially pure zirconium [J].

Lathabai, S. ;

Jarvis, B. L. ;

Barton, K. J. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (06) :573-581

← 1 2 3 →