Instrumented end notched flexure - Crack propagation and process zone monitoring Part II: Data reduction and experimental

被引：37
作者：
Budzik, M. K. [1 ,2 ,3 ,4 ]
Jumel, J. [1 ,2 ,3 ]
Ben Salem, N. [1 ,2 ,3 ,4 ]
Shanahan, M. E. R. [1 ,2 ,3 ]
机构：
[1] Univ Bordeaux, I2M, UMR 5295, F-33400 Talence, France
[2] CNRS, I2M, UMR 5295, F-33400 Talence, France
[3] Arts & Metiers ParisTech, I2M, UMR 5295, F-33400 Talence, France
[4] French Space Agcy CNES DLA, F-75612 Paris, France
来源：
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES | 2013年 / 50卷 / 02期
关键词：
End notched flexure; Mode I; Mode II; Process zone; Strain gauges; FRACTURE-TOUGHNESS; CANTILEVER BEAM; COMPOSITES; RESISTANCE; INITIATION; INTERFACE; SPECIMENS; BEHAVIOR; DESIGN; JOINTS;
D O I：
10.1016/j.ijsolstr.2012.08.030
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A mode II instrumented end notched flexure three point bending (ENF) adhesion test is described. The adhesive joint consists of two aluminium alloy (AW7075-T6) plates bonded with a structural epoxy adhesive (Hysol (R) EA 9395 (TM)). Strain gauges are attached to the outer surface (backface) of the substrates in the lengthwise direction to measure local surface strain during crack propagation. Simultaneously, load/displacement measurements are performed. Two cases were investigated. The first was static: the joint was loaded below the crack propagation threshold. In the second, applied load above the threshold led to crack propagation. The former test confirmed the predicted load transfer mechanism between bonded and unbonded parts of the joint. In the second case, the crack front process zone was revealed in situ in mode II, we believe for the first time. These new results permitted validation of simple or refined analytical/numerical models including those of the cohesive zone. In addition, the backface strain gauge monitoring technique exhibited unexpected mode I contributions, quantitatively evaluated. Finally, R-curves are presented, as estimated with various standard models and compared with that ppstulated, where the process zone is accounted for. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：310 / 319
页数：10
相关论文
共 42 条
[1]   On the influence of the shape of the interface law on the application of cohesive-zone models [J].
Alfano, G .
COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (06) :723-730
[2]   On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen [J].
Alfredsson, KS .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2004, 41 (16-17) :4787-4807
[3]  
[Anonymous], 2005, Standard Test Methods for DC Resistance or Conductance of Insulating Materials
[4]  
[Anonymous], 2007, STANDARD TEST METHOD
[5]   Adhesively bonded joints in composite materials: an overview [J].
Banea, M. D. ;
da Silva, L. F. M. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2009, 223 (L1) :1-18
[6]   MODE-2 STRESS-INTENSITY FACTORS FOR CRACKED WOOD BEAMS [J].
BARRETT, JD ;
FOSCHI, RO .
ENGINEERING FRACTURE MECHANICS, 1977, 9 (02) :371-&
[7]   An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates [J].
Bennati, Stefano ;
Colleluori, Massimiliano ;
Corigliano, Domenico ;
Valvo, Paolo S. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (11-12) :1735-1745
[8]   The determination of the mode II adhesive fracture resistance, GIIC, of structural adhesive joints:: an effective crack length approach [J].
Blackman, BRK ;
Kinloch, AJ ;
Paraschl, M .
ENGINEERING FRACTURE MECHANICS, 2005, 72 (06) :877-897
[9]   Effect of Adhesive Compliance in the Assessment of Soft Adhesives with the Wedge Test [J].
Budzik, M. ;
Jumel, J. ;
Imielinska, K. ;
Shanahan, M. E. R. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (1-3) :131-149
[10]   Process zone in the Single Cantilever Beam under transverse loading - Part II: Experimental [J].
Budzik, M. K. ;
Jumel, J. ;
Shanahan, M. E. R. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2011, 56 (01) :13-21
12345