Computed microtomography evaluation of calcium hydroxide-based root canal dressing removal from oval root canals by different methods of irrigation

The aim of this study was to evaluate the capacity of conventional irrigation, passive ultrasonic irrigation (PUI), and Easy Clean for removing calcium hydroxide-based root canal dressing from oval root canals. Thirty mandibular uniradicular incisors with oval canals were used, and subjected to chemical-mechanical preparation with Reciproc R40 instruments. The main canal was filled with a paste based on Ca(OH)(2) P.A., iodoform and propylene glycol in the ratio of 3:1:1. The teeth were stored in 100% humidity at a temperature of 37 degrees C for 14 days. Afterwards, the teeth were divided into three groups (n = 10) according to the method of irrigation used (conventional irrigation, PUI, and Easy Clean). The specimens were analyzed by computed microtomography at three time intervals: before placing the root canal dressing, with the root canal dressing in place, and after application of the irrigation methods for removing it. The data were submitted to Kruskal-Wallis and Dunn tests for analyzing the canal as a whole, and Friedman and Dunn for analyzing the root thirds. The results showed that conventional irrigation was less efficient for removing the root canal dressing in comparison with the methods that agitated the irrigant solution (p < .05). When the root canal was analyzed as a whole, Easy Clean, and PUI were similar (p > .05). In analysis of the thirds, Easy Clean was more efficient than conventional irrigation in all the thirds, while PUI showed this behavior only in the cervical third (p < .05). The authors concluded that in oval canals, none of the irrigation methods were capable of removing all the root canal dressing, however, the methods that agitated the irrigant solution were more efficient than conventional irrigation.