Characterization of air pollutant emissions from construction machinery in Beijing and evaluation of the effectiveness of control measures based on information code registration data

Non-road mobile machinery (NRMM), mainly construction machinery, has a high emission intensity of air pollutants, significantly impacting urban air quality. Most previous estimates of NRMM emissions have employed a top-down approach mainly based on estimates of energy consumption, leading to large uncertainties. This study uses the information code registration data specified in the latest regulations to establish a bottom-up method for emission accounting to more precisely identify the characteristics of air pollutant emissions from construction machinery in Beijing in 2020. Moreover, the study evaluates the effectiveness of the implementation of the corresponding control measures in conjunction with the current situation of pollution control of NRMM in Beijing. The results show the following: (1) Based on the information code registration data, there are 37,000-based fuel construction machines, with excavators accounting for the largest proportion (56%), loaders and forklifts also accounting for large proportions (19% and 15%, respectively), representing the main types of construction machinery. (2) Information code registration data better reflect the actual situation of construction machinery emissions than the top-down method; the emissions of the main air pollutants NOx, PM2.5, and VOCs amount to 12,000 tons, 600 tons, and 1000 tons, respectively, which are overestimated to some extent by the top-down method. (3) Loaders and excavators have a large contribution to emissions, accounting for 80-91% of these three pollutants emissions; there is a large quantity of machinery classified into the China III standard, accounting for 64-68% of these pollutants emissions; the designation of low emission zones banning the use of high-emission machinery plays a positive role in pollution reduction, but high-emission machinery is still used in these regions, which requires further attention. (4) In the future, the scope of these regions banning high emission machinery and the types of controlled machinery should be further expanded, and the supervision and enforcement should be strengthened, Furthermore, the structural adjustment and energy conservation of construction machinery should be promoted, and measures such as electrification should be implemented for part of the light construction machinery to continue to reduce pollutant emissions.