Effect of Small Alloying Additions on the Mechanical Properties of Sintered Al-Sn Composites

被引：0
作者：
Rusin, N. M. [1 ]
Skorentsev, A. L. [1 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk 634055, Russia
来源：
RUSSIAN METALLURGY | 2022年 / 2022卷 / 04期
关键词：
aluminium-matrix composite; sintering; equal channel angular pressing; mechanical properties; BEHAVIOR;
D O I：
10.1134/S0036029522040255
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The Al-Sn composites prepared by liquid phase sintering of a mixture of alloyed aluminum and tin powders are studied. A small amount of alloying additions (Zn, Mg, Si, Cu) is found to promote substantial hardening of the aluminum matrix during its treatment by equal channel angular pressing, but these additions decrease the plastic properties. The maximum strength and the minimum plasticity are detected in the samples alloyed with 2% Cu.
引用
收藏
页码：325 / 331
页数：7
相关论文
共 18 条
  • [1] Investigation on the Effect of ECAP Routes on the Wear Behavior of AA2014
    Divya, S. P.
    Nagaraj, M.
    Kesavamoorthy, M.
    Srinivasan, S. A.
    Ravisankar, B.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (01) : 67 - 77
  • [2] Tensile Properties and Fracture Characteristics of ECAP-Processed Al and Al-Cu Alloys
    El Aal, Mohamed Ibrahim Abd
    El Mahallawy, Nahed
    Shehata, Farouk A.
    El Hameed, Mohamed Abd
    Yoon, Eun Yoo
    Lee, Jung Hwan
    Kim, Hyoung Seop
    [J]. METALS AND MATERIALS INTERNATIONAL, 2010, 16 (05) : 709 - 716
  • [3] Structural evolution and the Hall-Petch relationship in an Al-Mg-Li-Zr alloy with ultra-fine grain size
    Furukawa, M
    Iwahashi, Y
    Horita, Z
    Nemoto, M
    Tsenev, NK
    Valiev, RZ
    Langdon, TG
    [J]. ACTA MATERIALIA, 1997, 45 (11) : 4751 - 4757
  • [4] Gopienko V. G., 2004, RF Patent, Patent No. 2229960
  • [5] Microstructural and mechanical behavior of highly deformed Al-Sn alloys
    Hernandez, O.
    Gonzalez, G.
    [J]. MATERIALS CHARACTERIZATION, 2008, 59 (05) : 534 - 541
  • [6] Honeycombe R.W.K., 1972, The plastic deformation of metals
  • [7] Kozlov E. V., 2016, Foundations of Plastic Deformation of Nano-Structured Materials
  • [8] Mironov A. E., 2016, ALUMINIEVYE SPLAVY A
  • [9] Microstructure and tribological properties of Al-Sn, Al-Sn-Pb, and Sn-Sb-Cu alloys subjected to severe plastic deformation
    Noskova, N. I.
    Korshunov, L. G.
    Korznikov, A. V.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2008, 50 (11-12) : 593 - 599
  • [10] Reda, 2019, EVOL MECH ENG, DOI [10.31031/EME.2019.02.000547, DOI 10.31031/EME.2019.02.000547]
12