Development of novel icephobic surfaces using siloxane-modified epoxy nanocomposites

被引:33
|
作者
Elzaabalawy, Assem [1 ]
Meguid, Shaker A. [1 ]
机构
[1] Univ Toronto, Mech & Aerosp Design Lab, Toronto, ON M5S 3G8, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
Ice accretion; Icephobicity; Anti-icing; Superhydrophobicity; Supercooled; Freezing delay; Ice adhesion; SUPERHYDROPHOBIC SURFACES; ANTIICING PERFORMANCE; ICE; FUNDAMENTALS; TEMPERATURE; COATINGS; BEHAVIOR; IMPACT; ENERGY; ROBUST;
D O I
10.1016/j.cej.2021.133637
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Ice accretion is the process by which a layer of ice builds up on solid objects that are exposed to freezing pre-cipitation or supercooled cloud of droplets. In fact, the onset of ice accretion can be sudden and hazardous. This has motivated the development and deployment of icephobic coatings as an effective strategy to prevent or suppress ice accumulation on critical and functional surfaces. Previously, we reported a scalable technique to fabricate durable superhydrophobic coatings using siloxane-modified epoxy nanocomposites. Herein, we extend our earlier research by investigating the potential of using these nanocomposites as candidates for icephobicity. Accordingly, nanocomposites with varied silica nanoparticles' concentrations were considered in our efforts to modify the surface energy and structure to transform the original superhydrophobic surface into an icephobic surface. Our results indicate that a highly superhydrophobic surface (25 wt% nanocomposite) can be ineffective in combating ice accretion at subfreezing temperatures. In contrast, a nanocomposite with a nanoparticles concentration of 35 wt% was found to (i) facilitate the full rebounding of supercooled droplets, while maintained at-10 & DEG;C, (ii) reduce the water nucleation temperature to-12 & DEG;C, (iii) delay the freezing process by -94 s at a temperature of-10 & DEG;C, and (iv) reduce the ice adhesion strength to -230 kPa. This comprehensive assessment of the different aspects of icephobicity was considered essential as it ensures the surface's effectiveness against the variety of conditions that lead to ice accretion. Moreover, the developed nanocomposite coatings demon-strated excellent adhesion strength as well as consistent wettability and icephobicity after being subjected to numerous icing/thaw cycles. The outcome of our effort offers a great potential for the large-scale adoption of siloxane-modified nanocomposites in applications that require protection against ice accretion.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Influence of Stone Particles on the Rheological Behavior of a Novel Photopolymerizable Siloxane-Modified Acrylic Resin
    Corcione, C. Esposito
    Frigione, M.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 122 (02) : 942 - 947
  • [32] Protective Mechanisms of Siloxane-Modified Epoxy Novolac Coatings at High-Pressure, High-Temperature Conditions
    Rajagopalan, Narayanan
    Olsen, Mads
    Larsen, Toke Skaarup
    Fjaelberg, Tine Jensen
    Weinell, Claus Erik
    Kiil, Soren
    ACS OMEGA, 2024, 9 (28): : 30675 - 30684
  • [33] Adamantane-based epoxy resin and siloxane-modified adamantane-based epoxy resin: Characterization of thermal, dielectric and optical properties
    Tsai, C. W.
    Wu, K. H.
    Yang, C. C.
    Wang, G. P.
    REACTIVE & FUNCTIONAL POLYMERS, 2015, 91-92 : 11 - 18
  • [34] A novel moisture-controlled siloxane-modified hyperbranched waterborne polyurethane for durable superhydrophobic coatings
    Zhao, Yuting
    Hao, Tonghui
    Wu, Wei
    Meng, Yuan
    Cao, Xianwu
    Zhang, Qunchao
    She, Wei
    You, Jun
    Shi, Dean
    Jiang, Tao
    APPLIED SURFACE SCIENCE, 2022, 587
  • [35] Preparation and characterization of siloxane modified: Epoxy terminated polyurethane-silver nanocomposites
    Mathew, Aiswarea
    Kurmvanshi, Surendra
    Mohanty, Smita
    Nayak, Sanjay K.
    POLYMER COMPOSITES, 2018, 39 : E2390 - E2396
  • [36] Siloxane-modified epoxy resin-clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach
    Yeh, JM
    Huang, HY
    Chen, CL
    Su, WF
    Yu, YH
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (08): : 2753 - 2763
  • [37] Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel
    Lee, Yuan Xien
    Ahmad, Faiz
    Karuppanan, Saravanan
    Sumby, Christopher
    Shahed, Chowdhury Ahmed
    Ramli, Siti Haslina
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2024, 35 (01)
  • [38] Studies on synthesis and characterization of multi-walled carbon nanotube-reinforced polyimide nanocomposites based on a siloxane-modified anhydride
    Gunasekaran, S. G.
    Devaraju, S.
    Alagar, M.
    Dharmendirakumar, M.
    HIGH PERFORMANCE POLYMERS, 2014, 26 (01) : 43 - 51
  • [39] Development of High-Performance Epoxy/Clay Nanocomposites by Incorporating Novel Phosphonium Modified Montmorillonite
    Saitoh, Keiji
    Ohashi, Kenji
    Oyama, Toshiyuki
    Takahashi, Akio
    Kadota, Joji
    Hirano, Hiroshi
    Hasegawa, Kiichi
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 122 (01) : 666 - 675
  • [40] High performance flexible triboelectric nanogenerators using bio-derived films made of siloxane-modified castor oil
    Jena, Kishore K.
    Fatma, Bushara
    Arya, Sagar S.
    Alhassan, Saeed M.
    Chan, Vincent
    Pappa, Anna Maria
    Pitsalidis, Charalampos
    JOURNAL OF MATERIALS CHEMISTRY A, 2024, 12 (14) : 8340 - 8349